-
Kedo Reflector and Bracket for LED License Plate Lighting, bracket is suitable for license plate lighting item 41406 or 41427 | 63026Vendor:KedoArticle Number : 63026Manufacturer : KEDO KEDO system License Plate Base in leaner the vehicle rear optically integrated with e-tested LED turn signals / taillight / -Nummernschildbeleuchtung and reflector black aluminum coated structure Suitable for Euro plate 180 x 200 mm
- €15,55
€18,97- €15,55
- Unit price
- per
-
Kedo Reflector Mounting Bracket, aluminum, fits bracket 63020 (can be equipped with number plate lamp 41406) | 63021Vendor:KedoArticle Number : 63021Manufacturer : KEDO SR500 KEDO license plate bracket Elaborate system holder which enables a clean solution for the vibration-damped mounting of the license plate; Participate allowable angle indicator modular design, gradual expansion possible (it can optionally taillight, turn signal, and reflector...
- €12,18
€18,27- €12,18
- Unit price
- per
-
Kedo Reflector Relocation Set (relocates the reflector Directly below the taillight) 'E' approved | 27899Vendor:KedoArticle Number : 27899Manufacturer : KEDO SR500 Reflector Conversion Set Puts the specified reflector upward to the original tail light console and covers the lead wire exposed; the original sheet metal clip must be removed in the backlight panel; e-tested reflector Not with license...
- €13,87
€17,75- €13,87
- Unit price
- per
-
Kedo Reflector, e-approved, dim. 100x15mm, bolt M5, with angled aluminum bracket, black powder-coated | 50181Vendor:KedoArticle Number : 50181Manufacturer : KEDO XT500 license plate bracket aluminum coated in black plastic With slots for individual characteristics Installation and mounting hardware (holder for Euro plate) or countersunk attachment to the vehicle and blind rivets (holder for French flag)
- €13,87
€20,80- €13,87
- Unit price
- per
-
Kedo Reinforcement Plate, bag inside of aluminum-coated black plastic, completes item 60707L and 60707R | 60709Vendor:KedoArticle Number : 60709Manufacturer : KEDO KEDO Base Rack & Supplies for SW-Motech SLC Luggage System A small, inconspicuous and stable luggage bag holder Fits visually complement to the lines of SR500 / XT500 (see table below) Takes z. As the SW-Motech LegendGear side...
- €10,50
€13,44- €10,50
- Unit price
- per
-
Kedo Removal Tool for Speedometer Drive, 3.8 "drive (for Service and Repair Purpose) | 61124Vendor:KedoArticle Number : 61124Manufacturer : KEDO SR / XT500 Speedometer Drive
- €13,87
€17,06- €13,87
- Unit price
- per
-
Kedo Removing of sealing compound (Necessary for follow up) | DL100Vendor:KedoArticle Number : DL100Manufacturer : KEDO Services around the Cylinder / Cylinderhead Professional service on state-of-the-art instruments with special care and attention Before grinding, each cylinder will be Individually Measured so did the exact assembly clearance between piston and cylinder is granted. The grinding...
- €8,40
€10,84- €8,40
- Unit price
- per
-
Kedo Repair Kit for Brake Master Cylinder, including diaphragm, frame and bolts M5x40 | 29463Vendor:KedoArticle Number : 29463Manufacturer : KEDO Repair Kit for Brake fluid reservoir Supplied with membrane plate and 4 screws For SR500-'83 fits
- €24,79
€33,71- €24,79
- Unit price
- per
-
Kedo Repair Kit for Rear Upper Shock Absorber Seat incl Drilling template, HSS drill bits, drill M8 Tap | 60684Vendor:KedoArticle Number : 60684Manufacturer : KEDO SR400 / 500 Thread Repair Kit Upper Rear Shock Mount repair kit including, Can also be used Bohrbuchse HSS drill M8 taps (Fertigschneider) and instructions for conversion to screw fixing be M8 M10, galvanized steel required double-threaded pin...
- €20,59
€26,56- €20,59
- Unit price
- per
-
Kedo Repair kit for Sprocket Cover mounting, 2 Pieces | 60683Vendor:KedoArticle Number : 60683Manufacturer : KEDO SR400 / 500, TT500 & XT500 Crankcase Repair Kit Ingenious repair kit for the mounting of the sprocket cover, if the thread on the crankcase is broken: Simply cut off the stub on the housing, glue the new...
- €21,01
€28,57- €21,01
- Unit price
- per
-
Kedo Repair kit for Throttle Slide Diaphragm (incl Illustrated Instructions.) | 30999Vendor:KedoArticle Number : 30999Manufacturer : KEDO Slide Carburettor & Diaphragm material abrasion and rills can lead to jamming of the slider and THUS dangerous driving situations may occure Due to design of construction Solely available mostly in a set! but in individual cases, sliders...
- €25,13
€30,91- €25,13
- Unit price
- per
-
Kedo Repair kit for Throttle Slide Diaphragm (incl Illustrated Instructions.) | 31023Vendor:KedoArticle Number : 31023Manufacturer : KEDO Slide Carburettor & Diaphragm material abrasion and rills can lead to jamming of the slider and THUS dangerous driving situations may occure Due to design of construction Solely available mostly in a set! but in individual cases, sliders...
- €25,13
€30,91- €25,13
- Unit price
- per
-
Kedo Repair kit Speedometer Drive (driving plate, spacer, oil seal) | 28077RPVendor:KedoArticle Number : 28077RPManufacturer : KEDO SR / XT500 Speedometer Drive
- €6,30
€9,07- €6,30
- Unit price
- per
-
Kedo Repair of Wheel Bearing Seat XT / SR500 Rear Right with Special Bushing incl Wheel Bearing Right. | DL110Vendor:KedoArticle Number : DL110Manufacturer : KEDO SR / XT500 Rear Hub Repair repair of the brake-side (right) wheel bearing the original rear hub Send only the rear wheel hub, NOT complete or cast wheels! Processing time about 4 weeks all SR500 / T and...
- €105,04
€136,55- €105,04
- Unit price
- per
-
Kedo Repair Threaded Sleeve for Front Sprocket Cover, for welding or bonding, see Item 41,244th For positioning see Item 60682 | 60681Vendor:KedoArticle Number : 60681Manufacturer : KEDO SR400 / 500, TT500 & XT500 Crankcase Repair Kit Ingenious repair kit for the mounting of the sprocket cover, if the thread on the crankcase is broken: Simply cut off the stub on the housing, glue the new...
- €13,87
€17,06- €13,87
- Unit price
- per
-
Kedo Repair Wiring Loom incl Contact Plates for Handlebar Switch Item No. 40102 | 41436Vendor:KedoArticle Number : 41436Manufacturer : KEDO BlowOut Here we offer you the remaining stock and special items - Available while stocks load Please note did the sales packaging of these items may already have signs of storage - the items are , HOWEVER, unless...
- €5,46
€6,77- €5,46
- Unit price
- per
-
Kedo Replacement Indicator Knob, Black (incl Screw.) | 50270Vendor:KedoArticle Number : 50270Manufacturer : KEDO Replacement Indicator Knob Similar to the OEM knob, this replacement part is Easily attached to the metal lug of the standard switch housing. The mounting hole of this has to be enlarged by a 2.5mm drill Milled black...
- €5,67
€6,86- €5,67
- Unit price
- per
-
Kedo Replacement Knob, 1 piece, suitable for T7 windshield adapter "High Up" / "high-low" item 31049/31079 | 31074Vendor:KedoArticle Number : 31074Manufacturer : KEDO KEDO Windshield Adapter> High & Low << br /> For stepless, tool-free adjustment of the OEM disk of about -15mm to + 70mm Robust stainless steel adapter 2mm simple and fast operation Uncomplicated, easy mounting Delivered incl. instructions...
- €3,78
€5,25- €3,78
- Unit price
- per
-
Kedo Replacement Rubber for Front Foot rest, 1 Pair OEM reference # 3LD-27413-00 | 31046Vendor:KedoArticle Number : 31046Manufacturer : KEDO Rubber for Front Foot rest Perfect replacement for brittle and worn original parts High quality material, easy replacement, price per pair
- €13,36
€17,77- €13,36
- Unit price
- per
-
Kedo Replacement Special Sprocket 15T for Item 90113 (can not be used separately, fits only in combination with counter holder from item 90113) | 90153Vendor:KedoArticle Number : 90153Manufacturer : KEDO TT / XT / SRX 600 Repair sprocket Allows a play-free pinion assembly even when worn waves; 15 tooth sprocket Reduced wear on the shaft stub and allows pinion assembly at up to 50% of worn gear shaft...
- €20,59
€24,71- €20,59
- Unit price
- per
Vendor:Samco
Article Code : TB2112-BKAprilia RSV 1000 Mille 1998-2003 Samco Sport Silicone Oil Hose (replaces OEM Oil Hose :- AP8144090)This is a high performance product which replaces your standard factory rubber hoses to a high quality Samco Sport silicone hose kit.Handmade in the UK and...
- From €39,70
€53,60- From €39,70
- Unit price
- per
Vendor:S2Concept
Engine shoe made of "fiberglass" (polyester) adaptable aprilia shiver, delivered with its mounting kit and its mounting instructions.this product is delivered raw or is painted in the color of your motorcycle, please choose the color code in the scrolling menu
- From €207,50
€255,22- From €207,50
- Unit price
- per
Vendor:S2Concept
The rear mudguard of Aprilia TUONO and RSV4 is made of fiberglass ABSit is delivered raw or painted (Only in Black YKV) (choice by drop-down menu)We deliver this product with a complete mounting kit for mounting
- From €124,17
€156,45- From €124,17
- Unit price
- per
- Choosing a selection results in a full page refresh.