-
Rizoma Single Handlebar Cap | MA303Vendor:RizomaClick to see the product at Rizoma page.>>>Part number: MA303A - Natural AnodizedPart number: MA303B - Black Anodized▪ "SPY-ARM" mirror bar end finisher▪ Machined from billet aluminum
- €50,94
€52,16- €50,94
- Unit price
- per
-
Rizoma Handlebar Caps | MA302Vendor:RizomaClick to see the product at Rizoma page.>>>Part number: MA302A - Natural AnodizedPart number: MA302B - Black AnodizedPart number: MA302G - Gold AnodizedPart number: MA302R - Red AnodizedPart number: MA302U - Blue AnodizedSimple parts with a strong aesthetic impact, our bar ends feature exceptional...
- €63,39
€66,99- €63,39
- Unit price
- per
-
Rear footrest blanking platesVendor:Cnc RacingPlates made of billet-machined aluminium and subsequently surface anodised. Designed to fill the screw's holes once you have removed the rear footrest pillion hangers, protecting them from water and dirt. The design of the plates is also studied to provide a fixing point for...
- €155,00
€187,55- €155,00
- Unit price
- per
-
Mounting kit for mirrors/handlebar weight, BlackVendor:Cnc RacingMounting kit for our Bar-end mirrors and handlebar balancers.The kit consists of two pieces, for right and left side.For orders todestinationmainland ITALY the delivery time is24-48 hours, it can extend to3-5 days if the destination ison an island.As soon as the courier takes charge...
- €51,14
€56,70- €51,14
- Unit price
- per
-
Mounting kit for Arrow Exhaust with CNC Racing Rearsets PE227Vendor:Cnc RacingThe kit allow the mounting of the Arrow Exhaust with our rearsets PE227B / PE227RS on the MV Agusta Superveloce.The kit consists of two brackets made in light alloy, machined from solid and then anodized and screws for an easy assembly.For orders todestinationmainland ITALY...
- €153,50
€205,69- €153,50
- Unit price
- per
-
Handlebar ends Tricolore, RedVendor:Cnc RacingHandlebar balancer set made in light alloy, machined from solid and then anodized.The kit comes with several screws and rubber expanders needed to mount to nearly any handlebar.On motorcycles equipped with factory hand-guards will be necessary to have them removed.The kit consists of 2...
- €62,68
€88,50- €62,68
- Unit price
- per
-
Handlebar ends "Stars and Stripes", BlueVendor:Cnc RacingHandlebar weights made in light alloy, machined from solid and then anodized.The kit comes with several screws and rubber expanders needed to mount to nearly any handlebar.On motorcycles equipped with factory hand-guards will be necessary to have them removed.Kit consists of 2 pieces.For orders...
- €62,68
€82,60- €62,68
- Unit price
- per
-
Clip-ons Ø 50 mm, BlackVendor:Cnc RacingClip-ons made in light alloy, machined from solid and then anodized.The kit consists of two clipons, left and right.Main measures:Angle 7°Fork diameter 50 mmOffset 25 mmCollar height 31 mmSupplied tubes l. 250 mm useful length 215 mm - available tube l. 270 mm sold...
- €379,00
€530,60- €379,00
- Unit price
- per
-
Bar end mirror EVO - right, BlackVendor:Cnc RacingBar-end mirror made of light alloy, machined from solid and then anodized.The mirror can be fitted in either low or high position and is compatible with most handlebars, both original and non, with an expansion assembly system (handlebar internal diameter Ø 13.5/19 mm) or...
- €85,50
€107,73- €85,50
- Unit price
- per
-
Bar end mirror EVO - left, BlackVendor:Cnc RacingBar-end mirror made of light alloy, machined from solid and then anodized.The mirror can be fitted in either low or high position and is compatible with most handlebars, both original and non, with an expansion assembly system (handlebar internal diameter Ø 13.5/19 mm) or...
- €85,50
€110,30- €85,50
- Unit price
- per
-
CNC Racing Clip-ons - tube replacement | SMA01Vendor:Cnc RacingArticle Number : SMA01BReplacement tube made in light alloy, machined from solid and then anodized.
- €65,00
€86,45- €65,00
- Unit price
- per
-
CNC Racing Handlebar cap Blaze - only left side | PL002Vendor:Cnc RacingArticle Number : PL002BHandlebar weight CNC machined from light alloy billet and then given an anodized surface finish. This single weight has to be mounted on the other side when is installed our brake or clutch lever protection.
- €34,91
€31,44- €34,91
- Unit price
- per
-
CNC Racing Kit poggiapiedi TOURING - pilota | PEP05Vendor:Cnc RacingArticle Number : PEP05BPedivelle “Touring” per pilota lavorate dal pieno tramite macchine cnc con successiva anodizzazione superficiale.Progettate e sviluppate per conferire una guida più comoda e turistica senza perdere l’essenza sportiva, le lavorazioni tridimensionali create tramite sofisticate macchine a controllo numerico conferiscono alla pedana...
- €166,00
€217,46- €166,00
- Unit price
- per
-
CNC Racing Adjustable rear sets MV Agusta - Bicolor | PE227Vendor:Cnc RacingArticle Number : PE227BRAdjustable rear sets kit fully machined from solid through the use of CNC machines.The shift and brake levers are both equipped with rod adjustable and foldable, as are folding footrest.The kit also includes stainless steel screws lightened billet and carbon sill.Available...
- €545,00
€697,60- €545,00
- Unit price
- per
-
CNC Racing Grips EVO - Bicolor, Black/Red | MP105BRVendor:Cnc RacingArticle Number : MP105BRAluminium is teamed with innovative materials to create the "EVO" grips, a secure product sporting and eye-catching design.Machined from light alloy billet and then given an anodized surface finish, which means there are various colours to choose from. Special rubber inserts...
- €77,50
€98,42- €77,50
- Unit price
- per
-
CNC Racing Brembo billet CNC and forged brake master cylinder clamp with Mirror Mount thread M8 LH | CV016Vendor:Cnc RacingArticle Number : CV016BBrembo billet CNC and forged brake master cylinder clamp with mirror mount thread M8x1.25 Counter-clockwise, made in light alloy, machined from solid and then anodized.Kit consists of one clamp, Two black finished galvanized screws are included.Titanium screw set available as optional,...
- €70,07
€79,20- €70,07
- Unit price
- per
-
CNC Racing Brembo billet CNC and forged brake master cylinder clamp with Mirror Mount thread M10 LH | CV015Vendor:Cnc RacingArticle Number : CV015BBrembo billet CNC and forged brake master cylinder clamp with mirror mount thread M10x1.25 Counter-clockwise, made in light alloy, machined from solid and then anodized.Kit consists of one clamp, Two black finished galvanized screws are included.Titanium screw set available as optional,...
- €70,07
€89,76- €70,07
- Unit price
- per
-
CNC Racing Clip-ons handlebars Ø50 mm, Black | SM250BVendor:Cnc RacingArticle Number : SM250BBlack anodized handlebars clip-ons kit, machined from.Allow an inclination of 6.5°, a rise of 15 mm, and are available with tube length of 270 mm.Handlebars clip-ons kit comes with lightened stainless steel fasteners, tubing kit with plugs in both holes and...
- €221,50
€312,32- €221,50
- Unit price
- per
-
CNC Racing Folding rear brake lever peg Sport - eccentric, Black | RP9R0BVendor:Cnc RacingArticle Number : RP9R0BDedicated lever peg Sport for our "PRO" Rider control kitPEL01 - PEL02 - PEL03 - PEL04 - PEL05For orders todestinationmainland ITALY the delivery time is24-48 hours, it can extend to3-5 days if the destination ison an island.As soon as the courier...
- €51,14
€61,20- €51,14
- Unit price
- per
-
CNC Racing Folding gearshift lever peg Sport - eccentric, Black | RP9L0BVendor:Cnc RacingArticle Number : RP9L0BDedicated lever peg Sport for our "PRO" Rider control kitPEL01 - PEL02 - PEL03 - PEL04 - PEL05For orders todestinationmainland ITALY the delivery time is24-48 hours, it can extend to3-5 days if the destination ison an island.As soon as the courier...
- €51,14
€57,60- €51,14
- Unit price
- per
Vendor:Samco
Article Code : TB2112-BKAprilia RSV 1000 Mille 1998-2003 Samco Sport Silicone Oil Hose (replaces OEM Oil Hose :- AP8144090)This is a high performance product which replaces your standard factory rubber hoses to a high quality Samco Sport silicone hose kit.Handmade in the UK and...
- From €39,70
€53,60- From €39,70
- Unit price
- per
Vendor:S2Concept
Engine shoe made of "fiberglass" (polyester) adaptable aprilia shiver, delivered with its mounting kit and its mounting instructions.this product is delivered raw or is painted in the color of your motorcycle, please choose the color code in the scrolling menu
- From €207,50
€255,22- From €207,50
- Unit price
- per
Vendor:S2Concept
The rear mudguard of Aprilia TUONO and RSV4 is made of fiberglass ABSit is delivered raw or painted (Only in Black YKV) (choice by drop-down menu)We deliver this product with a complete mounting kit for mounting
- From €124,17
€156,45- From €124,17
- Unit price
- per
- Choosing a selection results in a full page refresh.