-
Kedo Idle fuel mixture screw incl Spring + O-ring, OEM reference # 50M-14105-00 | 29423Vendor:KedoArticle Number : 29423Manufacturer : KEDO Adjusting Screw Idle Mixture Due to wear or damage, the mixture gets too high enriched in the upper load range, Which cause worse responding behavior and delayed gas throttling response Please take over small parts from used part...
- €10,50
€12,91- €10,50
- Unit price
- per
-
Kedo O-ring for CO screw (screw pilot mixture), suitable for item 29423, 28327 | 28286Vendor:KedoArticle Number : 28286Manufacturer : KEDO Adjusting Screw Idle Mixture Due to wear or damage, the mixture gets too high enriched in the upper load range, Which cause worse responding behavior and delayed gas throttling response Please take over small parts from used part...
- €1,26
€1,86- €1,26
- Unit price
- per
-
Kedo Collar Screw M8x105, for Cylinder Head, matching washer see Item 29026 | 28015RPVendor:KedoArticle Number : 28015RPManufacturer : KEDO Cylinder Stud Bolt Price per unit
- €16,39
€20,82- €16,39
- Unit price
- per
-
Kedo Replica Ignition Coil, fits OEM mounting spots (Alternative see Item 30329, Spark Plug Cover see 40409/40036) | 27544RPVendor:KedoArticle Number : 27544RPManufacturer : KEDO SR & XT Ignition Coil High quality replica, respectively. OEM spare part
- €27,31
€33,59- €27,31
- Unit price
- per
-
Kedo clip, E.G. Gear Shaft, OEM Reference # 99009-20400 | 27329Vendor:KedoArticle Number : 27329Manufacturer : KEDO XT / SRX600 Gear clips Should be renewed after opening in principle Not included in the security clip range Price per piece
- €2,90
€3,57- €2,90
- Unit price
- per
-
Kedo Valve, Exhaust, 1 Piece (Weight and Flow-optimized), OEM reference # 34K-12121-00 | 27110Vendor:KedoArticle Number : 27110Manufacturer : KEDO Intake & Exhaust Valve Heavy duty valves in top quality Made from temperature resistant, nitrated special steel. Hardened valve stem ends prevent early wear (from "punching" the valve stem heads) Most useful assortment, all prices are per unit
- €22,27
€31,18- €22,27
- Unit price
- per
-
Kedo information sticker installation battery venting pants and battery change | 21260Vendor:KedoArticle Number : 21260Manufacturer : KEDO SRX600 Replica service stickers Battery breather pants Illustrated original to find the correct installation of the exhaust hose at SRX600 on the wing liner
- €4,16
€5,74- €4,16
- Unit price
- per
-
Kedo Speedometer Bracket "Eco" for aftermarket 60mm mini-instruments, stainless steel, mounting on upper yoke, speedometer mount 45mm / M6 | TH-10305Vendor:KedoArticle Number : TH-10305Manufacturer : KEDO 60mm Universal Bracket 'Eco' stainless steel 3 mm; Mounting on the fork bridge speedometer pickup 45 mm / M6; the ignition eliminated
- €7,14
€10,64- €7,14
- Unit price
- per
-
Kedo carburetor rebuild kit incl choke piston, spring & ball, sealing ring actuator shaft. (Jet sizes : # 210 / # 35 + special jet needle) | 94040Vendor:KedoArticle Number : 94040Manufacturer : KEDO KEDO Carburettor Rebuild Kit NC-manufactured components, pilot jet in terms of dimensioning and tolerance equal to the original parts Shipment Typically includes main jet, jet needle, needle jet, float needle valve, idling adjusting screw, relevant gaskets and O-rings...
- €35,71
€51,42- €35,71
- Unit price
- per
-
Kedo Carburettor Rebuild kit including choke piston, -Spring & -ball, gasket for Actuating shaft (Main Jet # 230 Pilot Jet # 25). | 94038Vendor:KedoArticle Number : 94038Manufacturer : KEDO KEDO Carburettor Rebuild Kit NC-manufactured components, pilot jet in terms of dimensioning and tolerance equal to the original parts Shipment Typically includes main jet, jet needle, needle jet, float needle valve, idling adjusting screw, relevant gaskets and O-rings...
- €22,27
€29,62- €22,27
- Unit price
- per
-
Kedo Replica Shield Expansion Chamber, Bottom, Stainless Steel, Polished | 92612Vendor:KedoArticle Number : 92612Manufacturer : KEDO TT / XT500 Heat Shield Replica Replica part of the no longer produced OEM spares. Ideal as replacement part or in addition to our replica exhaust Available in stainless steel or matt black coated Please order screws and...
- €33,53
€42,58- €33,53
- Unit price
- per
-
Kedo Replica Heat Shield for Silencer, long / top, black OEM reference # 1T1-14718-00 | 92043RPVendor:KedoArticle Number : 92043RPManufacturer : KEDO TT / XT500 Heat Shield Replica Replica part of the no longer produced OEM spares. Ideal as replacement part or in addition to our replica exhaust Available in stainless steel or matt black coated Please order screws and...
- €28,15
€39,97- €28,15
- Unit price
- per
-
Kedo Fuel Tank Decal XT500'80, Red / Black / White, complete Set LH / RH, overcoatable | 91435Vendor:KedoArticle Number : 91435Manufacturer : KEDO TT / XT500 Decal sets Fuel Tank high-end print through Pantone special colors, THEREFORE difficult to distinguish from the original No plotter print Which oft causes painting problems Subdivided design (like OEM Yamaha) for easier applicability. All decals...
- €41,93
€57,02- €41,93
- Unit price
- per
-
Kedo Fuel Tank Decal XT400 1981/1982, type 5fo red / black / white, left / right, can be painted over | 90323Vendor:KedoArticle Number : 90323Manufacturer : KEDO TT / XT500 Decal sets Fuel Tank high-end print through Pantone special colors, THEREFORE difficult to distinguish from the original No plotter print Which oft causes painting problems Subdivided design (like OEM Yamaha) for easier applicability. All decals...
- €33,53
€45,94- €33,53
- Unit price
- per
-
Kedo Service'- Decal, FUEL OIL (4Z, 20W-40) | 90102Vendor:KedoArticle Number : 90102Manufacturer : KEDO Oil Service Sticker Authentic reproduction, white film with black print. For professional coating suitable with clear lacquer
- €2,10
€3,13- €2,10
- Unit price
- per
-
Kedo Art Print by Ingo constantly grilling "Sonauto XT550" 4c digital print on high gloss poster paper, size approx. 50x70cm | 80154PVendor:KedoArticle Number : 80154PManufacturer : KEDO Color Prints objects of desire are our poster with XT designs, six-color or B / W printing on semi-gloss poster paper. Delivery individually in sturdy cardboard tube
- €12,61
€18,28- €12,61
- Unit price
- per
-
Kedo TT Indicator Bracket Rear, offset the indicators below the fender, suitable for indicators item 42019/42020, stainless steel black coated | 50302Vendor:KedoArticle Number : 50302Manufacturer : KEDO TT-style turn signal And Turn signal Holder Set Gives the XT500 a new slim, yet authentic classic look holder made of stainless steel, coated in black plastic TT -Replika turn signals come with e-approved glasses, but without bulbs...
- €16,39
€23,60- €16,39
- Unit price
- per
-
Kedo Replica Indicator Control Button, Red Lettering ( 'L / R'), incl Bolt | 50292Vendor:KedoArticle Number : 50292Manufacturer : KEDO XT500 Replica Indicator Control Button labeling L / R inlaid red, including operating arm and screw Fits for example XT500
- €5,84
€7,24- €5,84
- Unit price
- per
-
Kedo Sealing plug (dummy plug, soft PVC, black) for original rear fender, required for TT tail light (original tail light carrier not applicable) | 50189Vendor:KedoArticle Number : 50189Manufacturer : KEDO TT500 & XT500 Rear Fender & Supplies
- €2,06
€2,76- €2,06
- Unit price
- per
-
Kedo Replica Rivet Type plate, similar to the original, aluminum 0.6mm, for 1U6 chassis numbers, type 1 with dim. 68.5x27mm | 50185Vendor:KedoArticle Number : 50185Manufacturer : (included rivets not) KEDO Replica Type label The original paint aluminum nameplate for 1U6 chassis numbers; Dimensions: 68.5 × 27 × 0.6 mm
- €6,30
€8,38- €6,30
- Unit price
- per
Vendor:Samco
Article Code : TB2112-BKAprilia RSV 1000 Mille 1998-2003 Samco Sport Silicone Oil Hose (replaces OEM Oil Hose :- AP8144090)This is a high performance product which replaces your standard factory rubber hoses to a high quality Samco Sport silicone hose kit.Handmade in the UK and...
- From €39,70
€53,60- From €39,70
- Unit price
- per
Vendor:S2Concept
Engine shoe made of "fiberglass" (polyester) adaptable aprilia shiver, delivered with its mounting kit and its mounting instructions.this product is delivered raw or is painted in the color of your motorcycle, please choose the color code in the scrolling menu
- From €207,50
€255,22- From €207,50
- Unit price
- per
Vendor:S2Concept
The rear mudguard of Aprilia TUONO and RSV4 is made of fiberglass ABSit is delivered raw or painted (Only in Black YKV) (choice by drop-down menu)We deliver this product with a complete mounting kit for mounting
- From €124,17
€156,45- From €124,17
- Unit price
- per
- Choosing a selection results in a full page refresh.