{"title":"Kawasaki Motorcycle Parts","description":null,"products":[{"product_id":"license-plate-holder-and-mudguard-accde-splrk026","title":"License Plate Holder And Mudguard","description":"The product has been developed to keep the functions necessary for your vehicle, as a mudguard and the possibility of putting the indicators and an L.E.D license plate lighting to European standards (lighting supplied in the kit). The ultra-reinforced fixing is made of 5mm thick steel to stiffen the entire plate support against vibrations. It is placed on the axle of the swing arm wheel and takes the place of your aluminum chain tensioning shim if necessary. The arm part is made of 5 mm thick aluminum. The functionality of the mudguard is made of 3 mm thick aluminum. It is curved to conform to your tire and avoids splashing the passenger and the driver. The whole product is coated with a matte black epoxy paint, resistant to bad weather and stone impacts. The fender plate holder allows to put all European and International license plates as well as rod indicators and an approved L.E.D license plate light or a rear light. The shutter delivered in the kit is positioned in place of the original plate support, to prevent any infiltration of particles. A 1 meter electrical harness and its heat-retractable lugs are provided to connect your turn signals as well as the license plate lighting, you use your original connectors to make the connections, this will allow it to be connected. unplug. For your original indicators, you can mount them by drilling a second hole. The fender plate holder brings a futuristic touch. (The indicators are not delivered)","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388356886591,"sku":"accde_SPLRK026","price":349.92,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_SPLRK026_b.jpg?v=1781268160"},{"product_id":"license-plate-holder-and-mudguard-accde-splrk024","title":"License Plate Holder And Mudguard","description":"The product has been developed to keep the functions necessary for your vehicle, as a mudguard and the possibility of putting the indicators and an L.E.D license plate lighting to European standards (lighting supplied in the kit). The ultra-reinforced fixing is made of 5mm thick steel to stiffen the entire plate support against vibrations. It is placed on the axle of the swing arm wheel and takes the place of your aluminum chain tensioning shim if necessary. The arm part is made of 5 mm thick aluminum. The functionality of the mudguard is made of 3 mm thick aluminum. It is curved to conform to your tire and avoids splashing the passenger and the driver. The whole product is coated with a matte black epoxy paint, resistant to bad weather and stone impacts. The fender plate holder allows to put all European and International license plates as well as rod indicators and an approved L.E.D license plate light or a rear light. The shutter delivered in the kit is positioned in place of the original plate support, to prevent any infiltration of particles. A 1 meter electrical harness and its heat-retractable lugs are provided to connect your turn signals as well as the license plate lighting, you use your original connectors to make the connections, this will allow it to be connected. unplug. For your original indicators, you can mount them by drilling a second hole. The fender plate holder brings a futuristic touch. (The indicators are not delivered)","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388357935167,"sku":"accde_SPLRK024","price":333.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_SPLRK024_b.jpg?v=1781268243"},{"product_id":"license-plate-holder-and-mudguard-accde-splrk016","title":"License Plate Holder And Mudguard","description":"The product has been developed to keep the functions necessary for your vehicle, as a mudguard and the possibility of putting the indicators and an L.E.D license plate lighting to European standards (lighting supplied in the kit). The ultra-reinforced fixing is made of 5mm thick steel to stiffen the entire plate support against vibrations. It is placed on the axle of the swing arm wheel and takes the place of your aluminum chain tensioning shim if necessary. The arm part is made of 5 mm thick aluminum. The functionality of the mudguard is made of 3 mm thick aluminum. It is curved to conform to your tire and avoids splashing the passenger and the driver. The whole product is coated with a matte black epoxy paint, resistant to bad weather and stone impacts. The fender plate holder allows to put all European and International license plates as well as rod indicators and an approved L.E.D license plate light or a rear light. The shutter delivered in the kit is positioned in place of the original plate support, to prevent any infiltration of particles. A 1 meter electrical harness and its heat-retractable lugs are provided to connect your turn signals as well as the license plate lighting, you use your original connectors to make the connections, this will allow it to be connected. unplug. For your original indicators, you can mount them by drilling a second hole. The fender plate holder brings a futuristic touch. (The indicators are not delivered)","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388358131775,"sku":"accde_SPLRK016","price":333.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_SPLRK016_b.jpg?v=1781268266"},{"product_id":"license-plate-holder-accde-spk022","title":"License Plate Holder","description":"ACCESS DESIGN license plate holders, discreet and with a perfect finish, are developed specifically for the application of the indicated vehicle. It will perfectly match the location of your original license plate support. Designed to lighten your motorcycle with noble and robust materials. Developed by our designers to comply with required European standards.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388358393919,"sku":"accde_SPK022","price":99.92,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_SPK022_b.jpg?v=1781268295"},{"product_id":"license-plate-holder-accde-spk029","title":"License Plate Holder","description":"ACCESS DESIGN license plate holders, discreet and perfectly finished, are developed specifically for the application of the indicated vehicle. They will perfectly match the location of your original license plate holder. Designed to lighten your motorcycle with noble and robust materials, a sleek style that allows you to hide your connection cables. Developed by our designers to comply with the required European standards.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388358950975,"sku":"accde_SPK029","price":112.42,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_SPK029_b.jpg?v=1781268362"},{"product_id":"side-mount-license-plate-bracket-accde-splk003","title":"Side Mount License Plate Bracket","description":"The product has been designed in two parts to be able to adjust its inclination. It is placed on the oscillating arm in the axis of the wheel. The fixing is in stainless steel 5 millimeters thick and the plate part in 3 millimeters thick steel which ensures rigidity and absorbs all vibrations. The plate support is coated with a high quality black epoxy paint. It is supplied with LED license plate lighting to European standards and a screw fixing kit. You have the option of either putting your license plate light up or down in both cases the license plate will cover your entire license plate holder. The diameter of the mounting bracket of the plate support is 20 millimeters. All French and International license plates can be mounted on the side license plate holder. Fixing kits (Ref F1ECL003) and brake lights, indicators, 3 in 1 sidelights (Ref IN240) are not delivered. They are optional.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388359245887,"sku":"accde_SPLK003","price":87.42,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_SPLK003_b.jpg?v=1781268398"},{"product_id":"license-plate-holder-and-mudguard-accde-splrk015","title":"License Plate Holder And Mudguard","description":"The product has been developed to keep the functions necessary for your vehicle, as a mudguard and the possibility of putting the indicators and an L.E.D license plate lighting to European standards (lighting supplied in the kit). The ultra-reinforced fixing is made of 5mm thick steel to stiffen the entire plate support against vibrations. It is placed on the axle of the swing arm wheel and takes the place of your aluminum chain tensioning shim if necessary. The arm part is made of 5 mm thick aluminum. The functionality of the mudguard is made of 3 mm thick aluminum. It is curved to conform to your tire and avoids splashing the passenger and the driver. The whole product is coated with a matte black epoxy paint, resistant to bad weather and stone impacts. The fender plate holder allows to put all European and International license plates as well as rod indicators and an approved L.E.D license plate light or a rear light. The shutter delivered in the kit is positioned in place of the original plate support, to prevent any infiltration of particles. A 1 meter electrical harness and its heat-retractable lugs are provided to connect your turn signals as well as the license plate lighting, you use your original connectors to make the connections, this will allow it to be connected. unplug. For your original indicators, you can mount them by drilling a second hole. The fender plate holder brings a futuristic touch. (The indicators are not delivered)","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388359278655,"sku":"accde_SPLRK015","price":349.92,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_SPLRK015_b.jpg?v=1781268404"},{"product_id":"license-plate-holder-and-mudguard-accde-splrk017","title":"License Plate Holder And Mudguard","description":"The product has been developed to keep the functions necessary for your vehicle, as a mudguard and the possibility of putting the indicators and an L.E.D license plate lighting to European standards (lighting supplied in the kit). The ultra-reinforced fixing is made of 5mm thick steel to stiffen the entire plate support against vibrations. It is placed on the axle of the swing arm wheel and takes the place of your aluminum chain tensioning shim if necessary. The arm part is made of 5 mm thick aluminum. The functionality of the mudguard is made of 3 mm thick aluminum. It is curved to conform to your tire and avoids splashing the passenger and the driver. The whole product is coated with a matte black epoxy paint, resistant to bad weather and stone impacts. The fender plate holder allows to put all European and International license plates as well as rod indicators and an approved L.E.D license plate light or a rear light. The shutter delivered in the kit is positioned in place of the original plate support, to prevent any infiltration of particles. A 1 meter electrical harness and its heat-retractable lugs are provided to connect your turn signals as well as the license plate lighting, you use your original connectors to make the connections, this will allow it to be connected. unplug. For your original indicators, you can mount them by drilling a second hole. The fender plate holder brings a futuristic touch. (The indicators are not delivered)","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388359704639,"sku":"accde_SPLRK017","price":333.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_SPLRK017_b.jpg?v=1781268462"},{"product_id":"license-plate-holder-accde-spk015","title":"License Plate Holder","description":"ACCESS DESIGN license plate holders, discreet and perfectly finished, are developed specifically for the application of the indicated vehicle. They will perfectly match the location of your original license plate holder. Designed to lighten your motorcycle with noble and robust materials, a sleek style that allows you to hide your connection cables. Developed by our designers to comply with the required European standards.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388359868479,"sku":"accde_SPK015","price":114.17,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_SPK015_b.jpg?v=1781268483"},{"product_id":"license-plate-holder-accde-spk017","title":"License Plate Holder","description":"ACCESS DESIGN license plate holders, discreet and perfectly finished, are developed specifically for the application of the indicated vehicle. They will perfectly match the location of your original license plate holder. Designed to lighten your motorcycle with noble and robust materials, a sleek style that allows you to hide your connection cables. Developed by our designers to comply with the required European standards.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388359901247,"sku":"accde_SPK017","price":114.09,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_SPK017_b.jpg?v=1781268489"},{"product_id":"license-plate-holder-accde-spk018","title":"License Plate Holder","description":"ACCESS DESIGN license plate holders, discreet and perfectly finished, are developed specifically for the application of the indicated vehicle. They will perfectly match the location of your original license plate holder. Designed to lighten your motorcycle with noble and robust materials, a sleek style that allows you to hide your connection cables. Developed by our designers to comply with the required European standards.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388360130623,"sku":"accde_SPK018","price":104.09,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_SPK018_b.jpg?v=1781268506"},{"product_id":"license-plate-holder-accde-spk027","title":"License Plate Holder","description":"ACCESS DESIGN license plate holders, discreet and perfectly finished, are developed specifically for the application of the indicated vehicle. They will perfectly match the location of your original license plate holder. Designed to lighten your motorcycle with noble and robust materials, a sleek style that allows you to hide your connection cables. Developed by our designers to comply with the required European standards.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388360163391,"sku":"accde_SPK027","price":113.17,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_SPK027_b.jpg?v=1781268512"},{"product_id":"license-plate-holder-accde-spk005","title":"License Plate Holder","description":"ACCESS DESIGN license plate holders, discreet and with a perfect finish, are developed specifically for the application of the indicated vehicle. It will perfectly match the location of your original license plate support. Designed to lighten your motorcycle with noble and robust materials.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388360196159,"sku":"accde_SPK005","price":124.92,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_SPK005_b_f17ee843-ad29-4318-8f7c-6871a29b7328.jpg?v=1781268522"},{"product_id":"license-plate-holder-accde-spk014","title":"License Plate Holder","description":"ACCESS DESIGN license plate holders, discreet and perfectly finished, are developed specifically for the application of the indicated vehicle. They will perfectly match the location of your original license plate holder. Designed to lighten your motorcycle with noble and robust materials, a sleek style that allows you to hide your connection cables. Developed by our designers to comply with the required European standards.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388360261695,"sku":"accde_SPK014","price":107.42,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_SPK014_b.jpg?v=1781268523"},{"product_id":"license-plate-holder-and-mudguard-accde-splrk004","title":"License Plate Holder And Mudguard","description":"The fender plate holder does not fit on a Kawasaki Z750R. It has been developed to keep the functions necessary for your vehicle, as a mudguard and the possibility of putting the indicators and an L.E.D license plate lighting to European standards (lighting supplied in the kit). The ultra-reinforced fixing is made of 5mm thick steel to stiffen the entire plate support against vibrations. It is placed on the axle of the swing arm wheel and takes the place of your aluminum chain tensioning shim if necessary. The arm part is made of 5 mm thick aluminum. The functionality of the mudguard is made of 3 mm thick aluminum. It is curved to conform to your tire and avoids splashing the passenger and the driver. The whole product is coated with a matte black epoxy paint, resistant to bad weather and stone impacts. The fender plate holder allows to put all European and International license plates as well as rod indicators and an approved L.E.D license plate light or a rear light. The shutter delivered in the kit is positioned in place of the original plate support, to prevent any infiltration of particles. A 1 meter electrical harness and its heat-retractable lugs are provided to connect your turn signals as well as the license plate lighting, you use your original connectors to make the connections, this will allow it to be connected. unplug. For your original indicators, you can mount them by drilling a second hole. The fender plate holder brings a futuristic touch. (The indicators are not delivered)","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388360556607,"sku":"accde_SPLRK004","price":333.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_SPLRK004_b.jpg?v=1781268562"},{"product_id":"license-plate-holder-accde-spk021","title":"License Plate Holder","description":"ACCESS DESIGN license plate holders, discreet and perfectly finished, are developed specifically for the application of the indicated vehicle. They will perfectly match the location of your original license plate holder. Designed to lighten your motorcycle with noble and robust materials, a sleek style that allows you to hide your connection cables. Developed by our designers to comply with the required European standards.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388360785983,"sku":"accde_SPK021","price":104.92,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_SPK021_b.jpg?v=1781268600"},{"product_id":"license-plate-holder-accde-spk024","title":"License Plate Holder","description":"ACCESS DESIGN license plate holders, discreet and perfectly finished, are developed specifically for the application of the indicated vehicle. They will perfectly match the location of your original license plate holder. Designed to lighten your motorcycle with noble and robust materials, a sleek style that allows you to hide your connection cables. Developed by our designers to comply with the required European standards.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388360818751,"sku":"accde_SPK024","price":108.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_SPK024_b.jpg?v=1781268605"},{"product_id":"license-plate-holder-accde-spk026","title":"License Plate Holder","description":"ACCESS DESIGN license plate holders, discreet and perfectly finished, are developed specifically for the application of the indicated vehicle. They will perfectly match the location of your original license plate holder. Designed to lighten your motorcycle with noble and robust materials, a sleek style that allows you to hide your connection cables. Developed by our designers to comply with the required European standards.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388361015359,"sku":"accde_SPK026","price":108.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_SPK026_b.jpg?v=1781268610"},{"product_id":"rear-mudguard-accde-bak017","title":"Rear Mudguard","description":"No more splashes, dirt accumulated on the saddle, the back of the passenger and the driver. The rear mud flap is designed for short license plates. The product is manufactured in three parts, an aluminum arm, a reinforced steel attachment, the whole with a thickness of 5 millimeters. The mud flap is 3 millimeters thick aluminum, it is bent to the shape of your tire. The set is coated with a high quality matte black epoxy paint. Supplied with a fixing kit. It avoids all the projections of dirt while keeping the sobriety and the finish of your motorcycle.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388361637951,"sku":"accde_BAK017","price":279.09,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_BAK01733.jpg?v=1781268717"},{"product_id":"radiator-guard-grill-accde-crk016b","title":"Radiator Guard Grill","description":"The radiator grille in galvanized steel, protected with a high quality matt black epoxy paint. The radiator guard is 1.5mm thick, laser cut on digital controls, nitrogen cooled. Epoxy painting means choosing a paint with good covering power and thus giving your various supports a smooth and homogeneous appearance with a quick drying time. The epoxy paint is waterproof and offers good resistance to impact and scratches. The radiator grille protects against stone impacts. Also recommended for radiators. All models are designed so that enough air can circulate through the radiator and does not affect engine cooling even at extreme temperatures. Does not require maintenance and insensitivity to bad weather. Guarantees quality over the long term. This sober and designer radiator grille will enhance your motorcycle.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388362031167,"sku":"accde_CRK016B","price":83.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_CRK016B44.jpg?v=1781268742"},{"product_id":"rear-mudguard-accde-bak016","title":"Rear Mudguard","description":"No more splashes, dirt accumulated on the saddle, the back of the passenger and the driver. The rear mud flap is designed for short license plates. The product is manufactured in three parts, an aluminum arm, a reinforced steel attachment, the whole with a thickness of 5 millimeters. The mud flap is 3 millimeters thick aluminum, it is bent to the shape of your tire. The set is coated with a high quality matte black epoxy paint. Supplied with a fixing kit. It avoids all the projections of dirt while keeping the sobriety and the finish of your motorcycle.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388362948671,"sku":"accde_BAK016","price":279.09,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_BAK016_b.jpg?v=1781268728"},{"product_id":"rear-mudguard-accde-bak024","title":"Rear Mudguard","description":"No more splashes, dirt accumulated on the saddle, the back of the passenger and the driver. The rear mud flap is designed for short license plates. The product is manufactured in three parts, an aluminum arm, a reinforced steel attachment, the whole with a thickness of 5 millimeters. The mud flap is 3 millimeters thick aluminum, it is bent to the shape of your tire. The set is coated with a high quality matte black epoxy paint. Supplied with a fixing kit. It avoids all the projections of dirt while keeping the sobriety and the finish of your motorcycle.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388363046975,"sku":"accde_BAK024","price":279.09,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_BAK024_b.jpg?v=1781268733"},{"product_id":"rear-mudguard-accde-bak015","title":"Rear Mudguard","description":"No more splashes, dirt accumulated on the saddle, the back of the passenger and the driver. The rear mud flap is designed for short license plates. The product is manufactured in three parts, an aluminum arm, a reinforced steel attachment, the whole with a thickness of 5 millimeters. The mud flap is 3 millimeters thick aluminum, it is bent to the shape of your tire. The set is coated with a high quality matte black epoxy paint. Supplied with a fixing kit. It avoids all the projections of dirt while keeping the sobriety and the finish of your motorcycle.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388363145279,"sku":"accde_BAK015","price":268.34,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_BAK015_b.jpg?v=1781268738"},{"product_id":"rear-mudguard-accde-bak004","title":"Rear Mudguard","description":"No more splashes, dirt accumulated on the saddle, the back of the passenger and the driver. The rear mud flap is designed for short license plates. The product is manufactured in three parts, an aluminum arm, a reinforced steel attachment, the whole with a thickness of 5 millimeters. The mud flap is 3 millimeters thick aluminum, it is bent to the shape of your tire. The set is coated with a high quality matte black epoxy paint. Supplied with a fixing kit. It avoids all the projections of dirt while keeping the sobriety and the finish of your motorcycle.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388363178047,"sku":"accde_BAK004","price":279.09,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_BAK004_b.jpg?v=1781268743"},{"product_id":"engine-guard-accde-smk005b","title":"Engine Guard","description":"The engine guard is suitable for impact and protects the entire engine block and crankcases. The engine guard is made of 4 mm thick aluminum for better resistance, it is coated with a matt black epoxy paint. The center stand will work properly with the engine guard mounted on your motorcycle.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388363309119,"sku":"accde_SMK005B","price":166.59,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_SMK005B_b.jpg?v=1781268748"},{"product_id":"gps-or-phone-mount-accde-bgk028","title":"Gps Or Phone Mount","description":"The GPS or mobile phone support bar allows for an ideal view without taking your eyes off the road. It will fit perfectly on your Kawasaki Versys 1100 SE, ergonomic and robust, the product is made of black nylon reinforced with carbon fibers designed for high-performance use. It offers great rigidity and remarkable lightness. With a diameter of 16 millimeters, it allows the installation of all mobile phone and GPS holders. Your device thus finds an ideal place above the driving instruments. (The mobile phone mounting kit is not sold with it.)","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388364030015,"sku":"accde_BGK028","price":111.59,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_BGK028_b.jpg?v=1781268786"},{"product_id":"radiator-guard-grill-accde-crk025b","title":"Radiator Guard Grill","description":"The radiator grille in galvanized steel, protected with a high quality matt black epoxy paint. The radiator guard is 1.5mm thick, laser cut on digital controls, nitrogen cooled. Epoxy painting means choosing a paint with good covering power and thus giving your various supports a smooth and homogeneous appearance with a quick drying time. The epoxy paint is waterproof and offers good resistance to impact and scratches. The radiator grille protects against stone impacts. Also recommended for radiators. All models are designed so that enough air can circulate through the radiator and does not affect engine cooling even at extreme temperatures. Does not require maintenance and insensitivity to bad weather. Guarantees quality over the long term. This sober and designer radiator grille will enhance your motorcycle.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388364587071,"sku":"accde_CRK025B","price":83.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_CRK025B_b.jpg?v=1781268820"},{"product_id":"carburetor-cover-protection-accde-fcck005","title":"Carburetor Cover Protection","description":"We use the carburetor protection identically on the right side of your motorcycle. The fixing is made of stainless steel 2 millimeters thick, supplied with screws and threaded spacers. A quality and stylish product that retains the image and sobriety that the Cafe Racer style can bring. The chrome cover is not sold with the fixing kit. You will find it at your Kawasaki dealer.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388365242431,"sku":"accde_FCCK005","price":19.59,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_FCCK005_b.jpg?v=1781268850"},{"product_id":"radiator-guard-grill-accde-crk017b","title":"Radiator Guard Grill","description":"The radiator grille in galvanized steel, protected with a high quality matt black epoxy paint. The radiator guard is 1.5mm thick, laser cut on digital controls, nitrogen cooled. Epoxy painting means choosing a paint with good covering power and thus giving your various supports a smooth and homogeneous appearance with a quick drying time. The epoxy paint is waterproof and offers good resistance to impact and scratches. The radiator grille protects against stone impacts. Also recommended for radiators. All models are designed so that enough air can circulate through the radiator and does not affect engine cooling even at extreme temperatures. Does not require maintenance and insensitivity to bad weather. Guarantees quality over the long term. This sober and designer radiator grille will enhance your motorcycle.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388365373503,"sku":"accde_CRK017B","price":83.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_CRK017B_b.jpg?v=1781268866"},{"product_id":"radiator-guard-grill-accde-crk078b","title":"Radiator Guard Grill","description":"The radiator grille in galvanized steel, protected with a high quality matt black epoxy paint. The radiator guard is 1.5mm thick, laser cut on digital controls, nitrogen cooled. Epoxy painting means choosing a paint with good covering power and thus giving your various supports a smooth and homogeneous appearance with a quick drying time. The epoxy paint is waterproof and offers good resistance to impact and scratches. The radiator grille protects against stone impacts. Also recommended for radiators. All models are designed so that enough air can circulate through the radiator and does not affect engine cooling even at extreme temperatures. Does not require maintenance and insensitivity to bad weather. Guarantees quality over the long term. This sober and designer radiator grille will enhance your motorcycle.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388365799487,"sku":"accde_CRK078B","price":83.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_CRK078B_b.jpg?v=1781268917"},{"product_id":"radiator-guard-grill-accde-crk002b","title":"Radiator Guard Grill","description":"The radiator grille in galvanized steel, protected with a high quality matt black epoxy paint. The radiator guard is 1.5mm thick, laser cut on digital controls, nitrogen cooled. Epoxy painting means choosing a paint with good covering power and thus giving your various supports a smooth and homogeneous appearance with a quick drying time. The epoxy paint is waterproof and offers good resistance to impact and scratches. The radiator grille protects against stone impacts. Also recommended for radiators. All models are designed so that enough air can circulate through the radiator and does not affect engine cooling even at extreme temperatures. Does not require maintenance and insensitivity to bad weather. Guarantees quality over the long term. This sober and designer radiator grille will enhance your motorcycle.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388365832255,"sku":"accde_CRK002B","price":83.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_CRK002B_b.jpg?v=1781268920"},{"product_id":"radiator-guard-grill-accde-crk026b","title":"Radiator Guard Grill","description":"The radiator grille is made of galvanized steel, protected by a high quality matt black epoxy paint. The radiator protection is 1.5 millimeters thick, laser cut on numerical controls, cooled with nitrogen. The epoxy paint is to choose a paint with a good covering power and thus give your various supports a smooth and homogeneous aspect with a fast drying time. Epoxy paint is waterproof and offers good resistance to shocks and scratches. The radiator grille protects against stone impact. Also recommended for radiators. All models are designed so that enough air can circulate in the radiator and does not affect engine cooling, even at extreme temperatures. Maintenance-free and insensitive to the weather. Guarantees long-term quality. This radiator grille with its sober style and design will enhance your motorcycle.","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388366258239,"sku":"accde_CRK026B","price":74.92,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_CRK026B_b.jpg?v=1781268954"},{"product_id":"lowering-kit-accde-krsk014","title":"Lowering Kit","description":"Type: tie rod.\u003cbr\u003eAdapts the saddle height to the rider's body shape.\u003cbr\u003eProvides greater comfort and allows easier and safer maneuvering.\u003cbr\u003eManufactured from steel alloy, coated with black polyester paint.\u003cbr\u003eProfessional installation recommended.\u003cbr\u003eLowering -30mm","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388366389311,"sku":"accde_KRSK014","price":99.92,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_KRSK014_b.jpg?v=1781424167"},{"product_id":"lowering-kit-accde-krsk015","title":"Lowering Kit","description":"Type: tie rod.\u003cbr\u003eAdapts the saddle height to the rider's body shape.\u003cbr\u003eProvides greater comfort and allows easier and safer maneuvering.\u003cbr\u003eManufactured from steel alloy, coated with black polyester paint.\u003cbr\u003eProfessional installation recommended.\u003cbr\u003eLowering -35mm for the Z650\u003cbr\u003eLowering -30mm for the Ninja 650","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388366684223,"sku":"accde_KRSK015","price":124.17,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_KRSK015_b.jpg?v=1781268971"},{"product_id":"lowering-kit-accde-krsk016","title":"Lowering Kit","description":"Type: tie rod.\u003cbr\u003eAdapts the saddle height to the rider's body shape.\u003cbr\u003eProvides greater comfort and allows easier and safer maneuvering.\u003cbr\u003eManufactured from steel alloy, coated with black polyester paint.\u003cbr\u003eProfessional installation recommended.\u003cbr\u003eLowering -35mm for the Z900\u003cbr\u003eLowering -30mm for the Z900 RS","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388366716991,"sku":"accde_KRSK016","price":83.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_KRSK016_b.jpg?v=1781268974"},{"product_id":"lowering-kit-accde-krsk019","title":"Lowering Kit","description":"Type: tie rod.\u003cbr\u003eAdapts the saddle height to the rider's body shape.\u003cbr\u003eProvides greater comfort and allows easier and safer maneuvering.\u003cbr\u003eManufactured from steel alloy, coated with black polyester paint.\u003cbr\u003eProfessional installation recommended.\u003cbr\u003eLowering -35mm for the Z125\u003cbr\u003eLowering -30mm for the Ninja 125","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388366782527,"sku":"accde_KRSK019","price":83.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_KRSK019_b.jpg?v=1781268977"},{"product_id":"lowering-kit-accde-krsk028","title":"Lowering Kit","description":"Type: tie rod.\u003cbr\u003eAdapts the saddle height to the rider's body shape.\u003cbr\u003eProvides greater comfort and allows easier and safer maneuvering.\u003cbr\u003eManufactured from steel alloy, coated with black polyester paint.\u003cbr\u003eProfessional installation recommended.\u003cbr\u003eLowering -30mm","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388367011903,"sku":"accde_KRSK028","price":99.92,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_KRSK028_b.jpg?v=1781268993"},{"product_id":"lowering-kit-accde-krsk018","title":"Lowering Kit","description":"Type: tie rod.\u003cbr\u003eAdapts the saddle height to the rider's body shape.\u003cbr\u003eProvides greater comfort and allows easier and safer maneuvering.\u003cbr\u003eManufactured from steel alloy, coated with black polyester paint.\u003cbr\u003eProfessional installation recommended.\u003cbr\u003eLowering -35mm for the Z400 \/ Z500 \/ E1\u003cbr\u003eLowering -30mm for the Ninja 400 \/ Ninja 500 \/ Ninja E1","brand":"Access Design","offers":[{"title":"Default Title","offer_id":43388367077439,"sku":"accde_KRSK018","price":83.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/accde_KRSK018_b.jpg?v=1781268995"},{"product_id":"accossato-right-handguard-aluminium-hose-acc-de001-010-td-12","title":"Accossato right handguard, aluminium hose","description":"The Deflector brake guard is a product made in Italy. It is studied for racers safletly during the competions. Deflector protects and defends your brake and clutch lever from any kind of accident or contact with other vehicles. A very carefully study has allowed to reduce the aeredinamics effects. This product can be regulated in length and also laterally. In order to mount it on all the motorcycles it has specific adpters that permit to install on all the handlebars inner diameter from 12 to 20 mm. It is available in : black, red, blue,green,orange and gold. Accossato deflector is made in different material: Aluminium, in curved and streigth version; Carbon: carbon tube, straight and curved; aluminium connections. Deflector utility: In case of fall\u003cbr\u003eSpecifications: Joint variants 12-16 mm","brand":"Accossato","offers":[{"title":"Default Title","offer_id":43394503835711,"sku":"acc_DE001-010-TD-12","price":81.35,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/acc_DE001-010-TD-12_b.jpg?v=1781426253"},{"product_id":"accossato-right-handguard-aluminium-hose-acc-de001-010-tp-12","title":"Accossato right handguard, aluminium hose","description":"The Deflector brake guard is a product made in Italy. It is studied for racers safletly during the competions. Deflector protects and defends your brake and clutch lever from any kind of accident or contact with other vehicles. A very carefully study has allowed to reduce the aeredinamics effects. This product can be regulated in length and also laterally. In order to mount it on all the motorcycles it has specific adpters that permit to install on all the handlebars inner diameter from 12 to 20 mm. It is available in : black, red, blue,green,orange and gold. Accossato deflector is made in different material: Aluminium, in curved and streigth version; Carbon: carbon tube, straight and curved; aluminium connections. Deflector utility: In case of fall\u003cbr\u003eSpecifications: Joint variants 12-16 mm","brand":"Accossato","offers":[{"title":"Default Title","offer_id":43394503999551,"sku":"acc_DE001-010-TP-12","price":81.35,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/acc_DE001-010-TP-12_b.jpg?v=1781426255"},{"product_id":"accossato-right-handguard-aluminium-hose-acc-de001-010-td-16","title":"Accossato right handguard, aluminium hose","description":"The Deflector brake guard is a product made in Italy. It is studied for racers safletly during the competions. Deflector protects and defends your brake and clutch lever from any kind of accident or contact with other vehicles. A very carefully study has allowed to reduce the aeredinamics effects. This product can be regulated in length and also laterally. In order to mount it on all the motorcycles it has specific adpters that permit to install on all the handlebars inner diameter from 12 to 20 mm. It is available in : black, red, blue,green,orange and gold. Accossato deflector is made in different material: Aluminium, in curved and streigth version; Carbon: carbon tube, straight and curved; aluminium connections. Deflector utility: In case of fall\u003cbr\u003eSpecifications: Joint variants 16-20 mm","brand":"Accossato","offers":[{"title":"Default Title","offer_id":43394504097855,"sku":"acc_DE001-010-TD-16","price":81.35,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/acc_DE001-010-TD-16_b.jpg?v=1781426257"},{"product_id":"accossato-right-handguard-aluminium-hose-acc-de001-010-tp-16","title":"Accossato right handguard, aluminium hose","description":"The Deflector brake guard is a product made in Italy. It is studied for racers safletly during the competions. Deflector protects and defends your brake and clutch lever from any kind of accident or contact with other vehicles. A very carefully study has allowed to reduce the aeredinamics effects. This product can be regulated in length and also laterally. In order to mount it on all the motorcycles it has specific adpters that permit to install on all the handlebars inner diameter from 12 to 20 mm. It is available in : black, red, blue,green,orange and gold. Accossato deflector is made in different material: Aluminium, in curved and streigth version; Carbon: carbon tube, straight and curved; aluminium connections. Deflector utility: In case of fall\u003cbr\u003eSpecifications: Joint variants 16-20 mm","brand":"Accossato","offers":[{"title":"Default Title","offer_id":43394504327231,"sku":"acc_DE001-010-TP-16","price":81.35,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/acc_DE001-010-TP-16_b.jpg?v=1781426259"},{"product_id":"accossato-right-handguard-aluminium-hose-acc-de001-011-td-12","title":"Accossato right handguard, aluminium hose","description":"The Deflector brake guard is a product made in Italy. It is studied for racers safletly during the competions. Deflector protects and defends your brake and clutch lever from any kind of accident or contact with other vehicles. A very carefully study has allowed to reduce the aeredinamics effects. This product can be regulated in length and also laterally. In order to mount it on all the motorcycles it has specific adpters that permit to install on all the handlebars inner diameter from 12 to 20 mm. It is available in : black, red, blue,green,orange and gold. Accossato deflector is made in different material: Aluminium, in curved and streigth version; Carbon: carbon tube, straight and curved; aluminium connections. Deflector utility: In case of fall\u003cbr\u003eSpecifications: Joint variants 12-16 mm","brand":"Accossato","offers":[{"title":"Default Title","offer_id":43394504556607,"sku":"acc_DE001-011-TD-12","price":81.35,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/acc_DE001-011-TD-12_b.jpg?v=1781426262"},{"product_id":"accossato-right-handguard-aluminium-hose-acc-de001-011-tp-12","title":"Accossato right handguard, aluminium hose","description":"The Deflector brake guard is a product made in Italy. It is studied for racers safletly during the competions. Deflector protects and defends your brake and clutch lever from any kind of accident or contact with other vehicles. A very carefully study has allowed to reduce the aeredinamics effects. This product can be regulated in length and also laterally. In order to mount it on all the motorcycles it has specific adpters that permit to install on all the handlebars inner diameter from 12 to 20 mm. It is available in : black, red, blue,green,orange and gold. Accossato deflector is made in different material: Aluminium, in curved and streigth version; Carbon: carbon tube, straight and curved; aluminium connections. Deflector utility: In case of fall\u003cbr\u003eSpecifications: Joint variants 12-16 mm","brand":"Accossato","offers":[{"title":"Default Title","offer_id":43394504654911,"sku":"acc_DE001-011-TP-12","price":81.35,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/acc_DE001-011-TP-12_b.jpg?v=1781426264"},{"product_id":"accossato-right-handguard-aluminium-hose-acc-de001-011-td-16","title":"Accossato right handguard, aluminium hose","description":"The Deflector brake guard is a product made in Italy. It is studied for racers safletly during the competions. Deflector protects and defends your brake and clutch lever from any kind of accident or contact with other vehicles. A very carefully study has allowed to reduce the aeredinamics effects. This product can be regulated in length and also laterally. In order to mount it on all the motorcycles it has specific adpters that permit to install on all the handlebars inner diameter from 12 to 20 mm. It is available in : black, red, blue,green,orange and gold. Accossato deflector is made in different material: Aluminium, in curved and streigth version; Carbon: carbon tube, straight and curved; aluminium connections. Deflector utility: In case of fall\u003cbr\u003eSpecifications: Joint variants 16-20 mm","brand":"Accossato","offers":[{"title":"Default Title","offer_id":43394504753215,"sku":"acc_DE001-011-TD-16","price":81.35,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/acc_DE001-011-TD-16_b.jpg?v=1781426266"},{"product_id":"accossato-right-handguard-aluminium-hose-acc-de001-011-tp-16","title":"Accossato right handguard, aluminium hose","description":"The Deflector brake guard is a product made in Italy. It is studied for racers safletly during the competions. Deflector protects and defends your brake and clutch lever from any kind of accident or contact with other vehicles. A very carefully study has allowed to reduce the aeredinamics effects. This product can be regulated in length and also laterally. In order to mount it on all the motorcycles it has specific adpters that permit to install on all the handlebars inner diameter from 12 to 20 mm. It is available in : black, red, blue,green,orange and gold. Accossato deflector is made in different material: Aluminium, in curved and streigth version; Carbon: carbon tube, straight and curved; aluminium connections. Deflector utility: In case of fall\u003cbr\u003eSpecifications: Joint variants 16-20 mm","brand":"Accossato","offers":[{"title":"Default Title","offer_id":43394504917055,"sku":"acc_DE001-011-TP-16","price":81.35,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/acc_DE001-011-TP-16_b.jpg?v=1781426268"},{"product_id":"accossato-right-handguard-aluminium-hose-acc-de001-012-td-12","title":"Accossato right handguard, aluminium hose","description":"The Deflector brake guard is a product made in Italy. It is studied for racers safletly during the competions. Deflector protects and defends your brake and clutch lever from any kind of accident or contact with other vehicles. A very carefully study has allowed to reduce the aeredinamics effects. This product can be regulated in length and also laterally. In order to mount it on all the motorcycles it has specific adpters that permit to install on all the handlebars inner diameter from 12 to 20 mm. It is available in : black, red, blue,green,orange and gold. Accossato deflector is made in different material: Aluminium, in curved and streigth version; Carbon: carbon tube, straight and curved; aluminium connections. Deflector utility: In case of fall\u003cbr\u003eSpecifications: Joint variants 12-16 mm","brand":"Accossato","offers":[{"title":"Default Title","offer_id":43394505080895,"sku":"acc_DE001-012-TD-12","price":81.35,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/acc_DE001-012-TD-12_b.jpg?v=1781426271"},{"product_id":"accossato-right-handguard-aluminium-hose-acc-de001-012-tp-12","title":"Accossato right handguard, aluminium hose","description":"The Deflector brake guard is a product made in Italy. It is studied for racers safletly during the competions. Deflector protects and defends your brake and clutch lever from any kind of accident or contact with other vehicles. A very carefully study has allowed to reduce the aeredinamics effects. This product can be regulated in length and also laterally. In order to mount it on all the motorcycles it has specific adpters that permit to install on all the handlebars inner diameter from 12 to 20 mm. It is available in : black, red, blue,green,orange and gold. Accossato deflector is made in different material: Aluminium, in curved and streigth version; Carbon: carbon tube, straight and curved; aluminium connections. Deflector utility: In case of fall\u003cbr\u003eSpecifications: Joint variants 12-16 mm","brand":"Accossato","offers":[{"title":"Default Title","offer_id":43394505506879,"sku":"acc_DE001-012-TP-12","price":81.35,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/acc_DE001-012-TP-12_b.jpg?v=1781426273"},{"product_id":"accossato-right-handguard-aluminium-hose-acc-de001-012-td-16","title":"Accossato right handguard, aluminium hose","description":"The Deflector brake guard is a product made in Italy. It is studied for racers safletly during the competions. Deflector protects and defends your brake and clutch lever from any kind of accident or contact with other vehicles. A very carefully study has allowed to reduce the aeredinamics effects. This product can be regulated in length and also laterally. In order to mount it on all the motorcycles it has specific adpters that permit to install on all the handlebars inner diameter from 12 to 20 mm. It is available in : black, red, blue,green,orange and gold. Accossato deflector is made in different material: Aluminium, in curved and streigth version; Carbon: carbon tube, straight and curved; aluminium connections. Deflector utility: In case of fall\u003cbr\u003eSpecifications: Joint variants 16-20 mm","brand":"Accossato","offers":[{"title":"Default Title","offer_id":43394505801791,"sku":"acc_DE001-012-TD-16","price":81.35,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/acc_DE001-012-TD-16_b.jpg?v=1781426276"},{"product_id":"accossato-right-handguard-aluminium-hose-acc-de001-012-tp-16","title":"Accossato right handguard, aluminium hose","description":"The Deflector brake guard is a product made in Italy. It is studied for racers safletly during the competions. Deflector protects and defends your brake and clutch lever from any kind of accident or contact with other vehicles. A very carefully study has allowed to reduce the aeredinamics effects. This product can be regulated in length and also laterally. In order to mount it on all the motorcycles it has specific adpters that permit to install on all the handlebars inner diameter from 12 to 20 mm. It is available in : black, red, blue,green,orange and gold. Accossato deflector is made in different material: Aluminium, in curved and streigth version; Carbon: carbon tube, straight and curved; aluminium connections. Deflector utility: In case of fall\u003cbr\u003eSpecifications: Joint variants 16-20 mm","brand":"Accossato","offers":[{"title":"Default Title","offer_id":43394505900095,"sku":"acc_DE001-012-TP-16","price":81.35,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/acc_DE001-012-TP-16_b.jpg?v=1781426278"}],"url":"https:\/\/vaultmoto.com\/collections\/kawasaki-motorcycle-parts.oembed","provider":"Rydr Parts","version":"1.0","type":"link"}