{"title":"Brakes – Brembo","description":"\u003cp\u003eBrake pads, discs, levers, and related parts from Brembo.\u003c\/p\u003e","products":[{"product_id":"brembo-front-brake-pads-set-aprilia-rs-50-2006-0700465-brem-0700465","title":"Brembo FRONT BRAKE PADS SET APRILIA RS 50 2006 + | 0700465","description":"Article Number : 0700465\u003cbr\u003e\u003cbr\u003eBREMBO FRONT BRAKE PADS SET\u003cbr\u003eQuantity : 1 blister (For 1 Caliper )\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003ePlease remind to choose the compound in the dropdown menu when you add the product to your cart.\u003cbr\u003eCompounds: \u003cbr\u003eRC : A compound conceived solely for track use, a true racing pad suited for any type of competition.\u003cbr\u003eThe most significant characteristics of this compound are its high friction and consistent efficiency, especially at high disc temperatures. These characteristics ensure superlative, consistent braking for the entire duration of the race and make the braking system much less prone to fade. At low temperatures the efficiency of this compound is limited and consequently it is suited for road use.\u003cbr\u003eSC : Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last lap. The good friction coefficient of this material when cold allows efficient street use.\u003cbr\u003eGenuine (G.): Selected by motorcycle manufacturers, this is the Carbon Ceramic material developed by Brembo as OEM equipment. The cases where the catalogue code corresponds exactly to the material used on the specific application are highlighted in the catalogues you will find at your local dealer.\u003cbr\u003eGenuine brake pads are available in various compounds, each of which is characterised by a different friction coefficient. The friction coefficient is expressed with a number that has a value from 1 to 99: the higher the value of this number the higher the friction coefficient of that particular compound will be. 0-49 compounds are Carbon Ceramic and 50-99 are Sintered.\u003cbr\u003eSA : This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.\u003cbr\u003eSP : This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.\u003cbr\u003eCarbon Ceramic (CC) : An organic compound for Scooters with an excellent quality\/price ratio, long lasting and excellent performance in all conditions of use. It ensures high mileage and stability, especially on city streets where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eSX : This sintered compound designed for Off-Road and SuperMotard is designed to ensure maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off road; in other words, cold, hot and extremely difficult conditions (water, sand, mud) that require braking even at low disc temperatures. For this reason the material’s resistance to external atmospheric agents is particularly high. This pad is very aggressive and resistant to high temperatures and is therefore recommended for Motocross and SuperMotard.\u003cbr\u003eSD : Sintered Off-Road compound with good efficiency and significant stability in all conditions of use. Good wear resistance even in water and mud. More aggressive than the SX, it is particularly recommended for enduro use.\u003cbr\u003eTT : The Semi-metallic Carbon Ceramic that makes up this pad is also suited for Off Road use. It is a highly modulable material, formulated to work both in dry and wet conditions. It is particularly effective in poor grip situations where high modularity is required.\u003cbr\u003eXS : This is a specific sintered compound for Scooter applications, both front and rear, extremely stable and capable of ensuring consistent performance in all riding conditions.\u003cbr\u003eIt is the ideal material for latest generation maxi scooters and it is characterised by extremely easy running-in. In fact, these brake pads were developed specifically for this type of vehicle, characterised by city use, where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eLA: Sintered front brake pad good in performance and stability together with exceptional durability. This compouns has been studied for road but it can be used also for not intensive sport use","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442443419711,"sku":"brem_0700465","price":46.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_0700465_b.jpg?v=1782087988"},{"product_id":"brembo-front-brake-pads-set-sym-husky-125-1999-07023cc-brem-07023cc","title":"Brembo FRONT BRAKE PADS SET SYM HUSKY 125 1999 + | 07023CC","description":"Article Number : 07023CC\u003cbr\u003e\u003cbr\u003eBREMBO FRONT BRAKE PADS SET\u003cbr\u003eQuantity : 1 blister (For 1 Caliper )\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003ePlease remind to choose the compound in the dropdown menu when you add the product to your cart.\u003cbr\u003eCompounds: \u003cbr\u003eRC : A compound conceived solely for track use, a true racing pad suited for any type of competition.\u003cbr\u003eThe most significant characteristics of this compound are its high friction and consistent efficiency, especially at high disc temperatures. These characteristics ensure superlative, consistent braking for the entire duration of the race and make the braking system much less prone to fade. At low temperatures the efficiency of this compound is limited and consequently it is suited for road use.\u003cbr\u003eSC : Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last lap. The good friction coefficient of this material when cold allows efficient street use.\u003cbr\u003eGenuine (G.): Selected by motorcycle manufacturers, this is the Carbon Ceramic material developed by Brembo as OEM equipment. The cases where the catalogue code corresponds exactly to the material used on the specific application are highlighted in the catalogues you will find at your local dealer.\u003cbr\u003eGenuine brake pads are available in various compounds, each of which is characterised by a different friction coefficient. The friction coefficient is expressed with a number that has a value from 1 to 99: the higher the value of this number the higher the friction coefficient of that particular compound will be. 0-49 compounds are Carbon Ceramic and 50-99 are Sintered.\u003cbr\u003eSA : This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.\u003cbr\u003eSP : This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.\u003cbr\u003eCarbon Ceramic (CC) : An organic compound for Scooters with an excellent quality\/price ratio, long lasting and excellent performance in all conditions of use. It ensures high mileage and stability, especially on city streets where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eSX : This sintered compound designed for Off-Road and SuperMotard is designed to ensure maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off road; in other words, cold, hot and extremely difficult conditions (water, sand, mud) that require braking even at low disc temperatures. For this reason the material’s resistance to external atmospheric agents is particularly high. This pad is very aggressive and resistant to high temperatures and is therefore recommended for Motocross and SuperMotard.\u003cbr\u003eSD : Sintered Off-Road compound with good efficiency and significant stability in all conditions of use. Good wear resistance even in water and mud. More aggressive than the SX, it is particularly recommended for enduro use.\u003cbr\u003eTT : The Semi-metallic Carbon Ceramic that makes up this pad is also suited for Off Road use. It is a highly modulable material, formulated to work both in dry and wet conditions. It is particularly effective in poor grip situations where high modularity is required.\u003cbr\u003eXS : This is a specific sintered compound for Scooter applications, both front and rear, extremely stable and capable of ensuring consistent performance in all riding conditions.\u003cbr\u003eIt is the ideal material for latest generation maxi scooters and it is characterised by extremely easy running-in. In fact, these brake pads were developed specifically for this type of vehicle, characterised by city use, where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eLA: Sintered front brake pad good in performance and stability together with exceptional durability. This compouns has been studied for road but it can be used also for not intensive sport use","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442444271679,"sku":"brem_07023CC","price":35.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07023CC_b.jpg?v=1782088046"},{"product_id":"brembo-front-brake-pads-set-daelim-otello-125-2008-07037xs-brem-07037xs","title":"Brembo FRONT BRAKE PADS SET DAELIM OTELLO 125 2008 + | 07037XS","description":"Article Number : 07037XS\u003cbr\u003e\u003cbr\u003eBREMBO FRONT BRAKE PADS SET\u003cbr\u003eQuantity : 1 blister (For 1 Caliper )\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003ePlease remind to choose the compound in the dropdown menu when you add the product to your cart.\u003cbr\u003eCompounds: \u003cbr\u003eRC : A compound conceived solely for track use, a true racing pad suited for any type of competition.\u003cbr\u003eThe most significant characteristics of this compound are its high friction and consistent efficiency, especially at high disc temperatures. These characteristics ensure superlative, consistent braking for the entire duration of the race and make the braking system much less prone to fade. At low temperatures the efficiency of this compound is limited and consequently it is suited for road use.\u003cbr\u003eSC : Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last lap. The good friction coefficient of this material when cold allows efficient street use.\u003cbr\u003eGenuine (G.): Selected by motorcycle manufacturers, this is the Carbon Ceramic material developed by Brembo as OEM equipment. The cases where the catalogue code corresponds exactly to the material used on the specific application are highlighted in the catalogues you will find at your local dealer.\u003cbr\u003eGenuine brake pads are available in various compounds, each of which is characterised by a different friction coefficient. The friction coefficient is expressed with a number that has a value from 1 to 99: the higher the value of this number the higher the friction coefficient of that particular compound will be. 0-49 compounds are Carbon Ceramic and 50-99 are Sintered.\u003cbr\u003eSA : This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.\u003cbr\u003eSP : This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.\u003cbr\u003eCarbon Ceramic (CC) : An organic compound for Scooters with an excellent quality\/price ratio, long lasting and excellent performance in all conditions of use. It ensures high mileage and stability, especially on city streets where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eSX : This sintered compound designed for Off-Road and SuperMotard is designed to ensure maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off road; in other words, cold, hot and extremely difficult conditions (water, sand, mud) that require braking even at low disc temperatures. For this reason the material’s resistance to external atmospheric agents is particularly high. This pad is very aggressive and resistant to high temperatures and is therefore recommended for Motocross and SuperMotard.\u003cbr\u003eSD : Sintered Off-Road compound with good efficiency and significant stability in all conditions of use. Good wear resistance even in water and mud. More aggressive than the SX, it is particularly recommended for enduro use.\u003cbr\u003eTT : The Semi-metallic Carbon Ceramic that makes up this pad is also suited for Off Road use. It is a highly modulable material, formulated to work both in dry and wet conditions. It is particularly effective in poor grip situations where high modularity is required.\u003cbr\u003eXS : This is a specific sintered compound for Scooter applications, both front and rear, extremely stable and capable of ensuring consistent performance in all riding conditions.\u003cbr\u003eIt is the ideal material for latest generation maxi scooters and it is characterised by extremely easy running-in. In fact, these brake pads were developed specifically for this type of vehicle, characterised by city use, where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eLA: Sintered front brake pad good in performance and stability together with exceptional durability. This compouns has been studied for road but it can be used also for not intensive sport use","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442444861503,"sku":"brem_07037XS","price":44.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07037XS_b.jpg?v=1782088082"},{"product_id":"brembo-front-brake-pads-set-kymco-grand-dink-250-2000-07050xs-brem-07050xs","title":"Brembo FRONT BRAKE PADS SET KYMCO GRAND DINK 250 2000 + | 07050XS","description":"Article Number : 07050XS\u003cbr\u003e\u003cbr\u003eBREMBO FRONT BRAKE PADS SET\u003cbr\u003eQuantity : 1 blister (For 1 Caliper )\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003ePlease remind to choose the compound in the dropdown menu when you add the product to your cart.\u003cbr\u003eCompounds: \u003cbr\u003eRC : A compound conceived solely for track use, a true racing pad suited for any type of competition.\u003cbr\u003eThe most significant characteristics of this compound are its high friction and consistent efficiency, especially at high disc temperatures. These characteristics ensure superlative, consistent braking for the entire duration of the race and make the braking system much less prone to fade. At low temperatures the efficiency of this compound is limited and consequently it is suited for road use.\u003cbr\u003eSC : Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last lap. The good friction coefficient of this material when cold allows efficient street use.\u003cbr\u003eGenuine (G.): Selected by motorcycle manufacturers, this is the Carbon Ceramic material developed by Brembo as OEM equipment. The cases where the catalogue code corresponds exactly to the material used on the specific application are highlighted in the catalogues you will find at your local dealer.\u003cbr\u003eGenuine brake pads are available in various compounds, each of which is characterised by a different friction coefficient. The friction coefficient is expressed with a number that has a value from 1 to 99: the higher the value of this number the higher the friction coefficient of that particular compound will be. 0-49 compounds are Carbon Ceramic and 50-99 are Sintered.\u003cbr\u003eSA : This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.\u003cbr\u003eSP : This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.\u003cbr\u003eCarbon Ceramic (CC) : An organic compound for Scooters with an excellent quality\/price ratio, long lasting and excellent performance in all conditions of use. It ensures high mileage and stability, especially on city streets where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eSX : This sintered compound designed for Off-Road and SuperMotard is designed to ensure maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off road; in other words, cold, hot and extremely difficult conditions (water, sand, mud) that require braking even at low disc temperatures. For this reason the material’s resistance to external atmospheric agents is particularly high. This pad is very aggressive and resistant to high temperatures and is therefore recommended for Motocross and SuperMotard.\u003cbr\u003eSD : Sintered Off-Road compound with good efficiency and significant stability in all conditions of use. Good wear resistance even in water and mud. More aggressive than the SX, it is particularly recommended for enduro use.\u003cbr\u003eTT : The Semi-metallic Carbon Ceramic that makes up this pad is also suited for Off Road use. It is a highly modulable material, formulated to work both in dry and wet conditions. It is particularly effective in poor grip situations where high modularity is required.\u003cbr\u003eXS : This is a specific sintered compound for Scooter applications, both front and rear, extremely stable and capable of ensuring consistent performance in all riding conditions.\u003cbr\u003eIt is the ideal material for latest generation maxi scooters and it is characterised by extremely easy running-in. In fact, these brake pads were developed specifically for this type of vehicle, characterised by city use, where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eLA: Sintered front brake pad good in performance and stability together with exceptional durability. This compouns has been studied for road but it can be used also for not intensive sport use","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442445516863,"sku":"brem_07050XS","price":44.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07050XS_b.jpg?v=1782088126"},{"product_id":"brembo-front-brake-pads-set-bmw-c-1-125-1999-2002-0708335-brem-0708335","title":"Brembo FRONT BRAKE PADS SET BMW C 1 125 1999-2002 | 0708335","description":"Article Number : 0708335\u003cbr\u003e\u003cbr\u003eBREMBO FRONT BRAKE PADS SET\u003cbr\u003eQuantity : 1 blister (For 1 Caliper )\u003cbr\u003eModel : Genuine 35\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442447319103,"sku":"brem_0708335","price":34.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_0708335_b.jpg?v=1782088245"},{"product_id":"brembo-rear-sintered-brake-pad-for-caliper-07787470-brem-07787470","title":"Brembo REAR SINTERED BRAKE PAD FOR CALIPER | 07787470","description":"Article Number : 07787470\u003cbr\u003e\u003cbr\u003eREAR SINTERED BRAKE PAD BREMBO\u003cbr\u003eCode: 07787470\u003cbr\u003eCompatible with: Brembo racing caliper\u003cbr\u003eThis insertion refers to the single pad.\u003cbr\u003eIf your bike has two calipers you need to buy 4 pads.\u003cbr\u003eThese innovative tablets have been developed exclusively for high level competitions and are the same used by the teams in the SBK and SS World Championships.\u003cbr\u003eThey are able to guarantee maximum performance in the most extreme competitions: greater braking control, system stability, increased braking power, resistance to high temperatures, reduced wear.\u003cbr\u003eThese pads can also be used on the road but we recommend a sporty use on the track.\u003cbr\u003eN.B This picture is only indicative","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442448400447,"sku":"brem_07787470","price":48.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07787470_b.jpg?v=1782088316"},{"product_id":"brembo-rear-brake-pad-for-brambo-caliper-x206101-x206121-07934040-brem-07934040","title":"Brembo REAR BRAKE PAD FOR BRAMBO CALIPER X206101 \/ X206121 | 07934040","description":"Article Number : 07934040\u003cbr\u003e\u003cbr\u003eBREMBO REAR BRAKE PAD\u003cbr\u003eQuantity: 1 Pad\u003cbr\u003eCompatibility: Rear caliper Brembo Racing XA1J040 \/ 988870\u003cbr\u003eSintered Pad\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003eATTENTION: This listing refers to the single pad. We remind you that to complete 1 caliper it is necessary to purchase 2 pads.\u003cbr\u003eNB: The photo is purely indicative to demonstrate the quality of the product.\u003cbr\u003eFOR MORE INFORMATION DO NOT HESITATE TO CONTACT US.","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442448465983,"sku":"brem_07934040","price":107.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07934040_b.jpg?v=1782088321"},{"product_id":"brembo-rear-brake-pad-for-brambo-caliper-x206001-xa80810-07934080-brem-07934080","title":"Brembo REAR BRAKE PAD FOR BRAMBO CALIPER X206001 \/ XA80810 | 07934080","description":"Article Number : 07934080\u003cbr\u003e\u003cbr\u003eBREMBO REAR BRAKE PAD\u003cbr\u003eQuantity : 1 Pad\u003cbr\u003eCompatibility: Rear caliper Brembo Racing X206001 \/ XA80810\u003cbr\u003eSintered Pad\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003eATTENTION: This listing refers to the single pad. We remind you that to complete 1 caliper it is necessary to purchase 2 pads.","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442448498751,"sku":"brem_07934080","price":98.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07934080_b.jpg?v=1782088323"},{"product_id":"brembo-brake-pads-07bb01sp-sintered-metal-07bb01sp-brem-07bb01sp","title":"BREMBO Brake Pads 07BB01SP Sintered Metal | 07BB01SP","description":"Article Number: 07BB01SP\u003cbr\u003e\u003cbr\u003eThese are characterized by a high friction coefficient that stays constant whatever the operating conditions – in heat and cold alike – as well as resisting wear, for superior durability and better mileage.SP: a sintered compound intended for rear brakes, stable in all operating conditions","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442448597055,"sku":"brem_07BB01SP","price":39.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB01SP_b.jpg?v=1782088330"},{"product_id":"brembo-brake-pads-07bb0258-organic-07bb0258-brem-07bb0258","title":"BREMBO Brake Pads 07BB0258 Organic | 07BB0258","description":"Article Number: 07BB0258\u003cbr\u003e\u003cbr\u003eBrembo original brake pads are the OEM replacement. They feature a high cold and hot friction factor and are a benchmark in terms of longevity by virtue of moderate wear.Front\/rear brake padsMaterial: carbon-ceramic organicEffective in all conditions of useMileage performance","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442448629823,"sku":"brem_07BB0258","price":45.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB0258_b.jpg?v=1782088332"},{"product_id":"brembo-rear-brake-pads-set-bmw-s-1000-rr-1000-2009-2022-07bb02cc-brem-07bb02cc","title":"Brembo REAR BRAKE PADS SET BMW S 1000 RR 1000 2009-2022 | 07BB02CC","description":"Article Number : 07BB02CC\u003cbr\u003e\u003cbr\u003eBREMBO REAR BRAKE PADS SET\u003cbr\u003eQuantity : 1 blister (For 1 Caliper )\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003ePlease remind to choose the compound in the dropdown menu when you add the product to your cart.\u003cbr\u003eCompounds: \u003cbr\u003eRC : A compound conceived solely for track use, a true racing pad suited for any type of competition.\u003cbr\u003eThe most significant characteristics of this compound are its high friction and consistent efficiency, especially at high disc temperatures. These characteristics ensure superlative, consistent braking for the entire duration of the race and make the braking system much less prone to fade. At low temperatures the efficiency of this compound is limited and consequently it is suited for road use.\u003cbr\u003eSC : Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last lap. The good friction coefficient of this material when cold allows efficient street use.\u003cbr\u003eGenuine (G.): Selected by motorcycle manufacturers, this is the Carbon Ceramic material developed by Brembo as OEM equipment. The cases where the catalogue code corresponds exactly to the material used on the specific application are highlighted in the catalogues you will find at your local dealer.\u003cbr\u003eGenuine brake pads are available in various compounds, each of which is characterised by a different friction coefficient. The friction coefficient is expressed with a number that has a value from 1 to 99: the higher the value of this number the higher the friction coefficient of that particular compound will be. 0-49 compounds are Carbon Ceramic and 50-99 are Sintered.\u003cbr\u003eSA : This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.\u003cbr\u003eSP : This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.\u003cbr\u003eCarbon Ceramic (CC) : An organic compound for Scooters with an excellent quality\/price ratio, long lasting and excellent performance in all conditions of use. It ensures high mileage and stability, especially on city streets where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eSX : This sintered compound designed for Off-Road and SuperMotard is designed to ensure maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off road; in other words, cold, hot and extremely difficult conditions (water, sand, mud) that require braking even at low disc temperatures. For this reason the material’s resistance to external atmospheric agents is particularly high. This pad is very aggressive and resistant to high temperatures and is therefore recommended for Motocross and SuperMotard.\u003cbr\u003eSD : Sintered Off-Road compound with good efficiency and significant stability in all conditions of use. Good wear resistance even in water and mud. More aggressive than the SX, it is particularly recommended for enduro use.\u003cbr\u003eTT : The Semi-metallic Carbon Ceramic that makes up this pad is also suited for Off Road use. It is a highly modulable material, formulated to work both in dry and wet conditions. It is particularly effective in poor grip situations where high modularity is required.\u003cbr\u003eXS : This is a specific sintered compound for Scooter applications, both front and rear, extremely stable and capable of ensuring consistent performance in all riding conditions.\u003cbr\u003eIt is the ideal material for latest generation maxi scooters and it is characterised by extremely easy running-in. In fact, these brake pads were developed specifically for this type of vehicle, characterised by city use, where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eLA: Sintered front brake pad good in performance and stability together with exceptional durability. This compouns has been studied for road but it can be used also for not intensive sport use","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442449055807,"sku":"brem_07BB02CC","price":36.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB02CC_b.jpg?v=1782088335"},{"product_id":"brembo-brake-pads-07bb02sd-sintered-metal-07bb02sd-brem-07bb02sd","title":"BREMBO Brake Pads 07BB02SD Sintered Metal | 07BB02SD","description":"Article Number: 07BB02SD\u003cbr\u003e\u003cbr\u003eThese materials are designed to guarantee maximum efficiency under the various conditions encountered habitually in off-road riding – not only cold and heat, but inhospitable terrain as well (water, sand, mud), where braking at low temperatures is also a key requirement. With this in mind, resistance of the material to weathering agents is particularly important.SD: sintered Off-Road. Good efficiency and stability under all operating conditions. Suitably resistant to wear, even when exposed to water and mud. Less aggressive than the SX, giving more flexible control.","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442449088575,"sku":"brem_07BB02SD","price":36.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB02SD_b.jpg?v=1782088337"},{"product_id":"brembo-rear-brake-pads-set-yamaha-xtz-tenere-700-2019-2022-07bb02sx-brem-07bb02sx","title":"Brembo REAR BRAKE PADS SET YAMAHA XTZ TENERE 700 2019-2022 | 07BB02SX","description":"Article Number : 07BB02SX\u003cbr\u003e\u003cbr\u003eBREMBO REAR BRAKE PADS SET\u003cbr\u003eQuantity : 1 blister (For 1 Caliper )\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003ePlease remind to choose the compound in the dropdown menu when you add the product to your cart.\u003cbr\u003eCompounds: \u003cbr\u003eRC : A compound conceived solely for track use, a true racing pad suited for any type of competition.\u003cbr\u003eThe most significant characteristics of this compound are its high friction and consistent efficiency, especially at high disc temperatures. These characteristics ensure superlative, consistent braking for the entire duration of the race and make the braking system much less prone to fade. At low temperatures the efficiency of this compound is limited and consequently it is suited for road use.\u003cbr\u003eSC : Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last lap. The good friction coefficient of this material when cold allows efficient street use.\u003cbr\u003eGenuine (G.): Selected by motorcycle manufacturers, this is the Carbon Ceramic material developed by Brembo as OEM equipment. The cases where the catalogue code corresponds exactly to the material used on the specific application are highlighted in the catalogues you will find at your local dealer.\u003cbr\u003eGenuine brake pads are available in various compounds, each of which is characterised by a different friction coefficient. The friction coefficient is expressed with a number that has a value from 1 to 99: the higher the value of this number the higher the friction coefficient of that particular compound will be. 0-49 compounds are Carbon Ceramic and 50-99 are Sintered.\u003cbr\u003eSA : This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.\u003cbr\u003eSP : This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.\u003cbr\u003eCarbon Ceramic (CC) : An organic compound for Scooters with an excellent quality\/price ratio, long lasting and excellent performance in all conditions of use. It ensures high mileage and stability, especially on city streets where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eSX : This sintered compound designed for Off-Road and SuperMotard is designed to ensure maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off road; in other words, cold, hot and extremely difficult conditions (water, sand, mud) that require braking even at low disc temperatures. For this reason the material’s resistance to external atmospheric agents is particularly high. This pad is very aggressive and resistant to high temperatures and is therefore recommended for Motocross and SuperMotard.\u003cbr\u003eSD : Sintered Off-Road compound with good efficiency and significant stability in all conditions of use. Good wear resistance even in water and mud. More aggressive than the SX, it is particularly recommended for enduro use.\u003cbr\u003eTT : The Semi-metallic Carbon Ceramic that makes up this pad is also suited for Off Road use. It is a highly modulable material, formulated to work both in dry and wet conditions. It is particularly effective in poor grip situations where high modularity is required.\u003cbr\u003eXS : This is a specific sintered compound for Scooter applications, both front and rear, extremely stable and capable of ensuring consistent performance in all riding conditions.\u003cbr\u003eIt is the ideal material for latest generation maxi scooters and it is characterised by extremely easy running-in. In fact, these brake pads were developed specifically for this type of vehicle, characterised by city use, where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eLA: Sintered front brake pad good in performance and stability together with exceptional durability. This compouns has been studied for road but it can be used also for not intensive sport use","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442449121343,"sku":"brem_07BB02SX","price":41.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB02SX_b.jpg?v=1782088340"},{"product_id":"brembo-brake-pads-07bb0359-organic-07bb0359-brem-07bb0359","title":"BREMBO Brake Pads 07BB0359 Organic | 07BB0359","description":"Article Number: 07BB0359\u003cbr\u003e\u003cbr\u003eBrembo original brake pads are the OEM replacement. They feature a high cold and hot friction factor and are a benchmark in terms of longevity by virtue of moderate wear.Front\/rear brake padsMaterial: carbon-ceramic organicEffective in all conditions of useMileage performance","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442449219647,"sku":"brem_07BB0359","price":45.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB0359_b.jpg?v=1782088344"},{"product_id":"brembo-rear-brake-pads-set-bmw-r-1200-rs-1200-2015-2018-07bb0373-brem-07bb0373","title":"Brembo REAR BRAKE PADS SET BMW R 1200 RS 1200 2015-2018 | 07BB0373","description":"Article Number : 07BB0373\u003cbr\u003e\u003cbr\u003eBREMBO REAR BRAKE PADS SET\u003cbr\u003eQuantity : 1 blister (For 1 Caliper )\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003ePlease remind to choose the compound in the dropdown menu when you add the product to your cart.\u003cbr\u003eCompounds: \u003cbr\u003eRC : A compound conceived solely for track use, a true racing pad suited for any type of competition. The most significant characteristics of this compound are its high friction and consistent efficiency, especially at high disc temperatures. These characteristics ensure superlative, consistent braking for the entire duration of the race and make the braking system much less prone to fade. At low temperatures the efficiency of this compound is limited and consequently it is suited for road use.\u003cbr\u003eSC : Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last lap. The good friction coefficient of this material when cold allows efficient street use.\u003cbr\u003eGenuine (G.): Selected by motorcycle manufacturers, this is the Carbon Ceramic material developed by Brembo as OEM equipment. The cases where the catalogue code corresponds exactly to the material used on the specific application are highlighted in the catalogues you will find at your local dealer. Genuine brake pads are available in various compounds, each of which is characterised by a different friction coefficient. The friction coefficient is expressed with a number that has a value from 1 to 99: the higher the value of this number the higher the friction coefficient of that particular compound will be. 0-49 compounds are Carbon Ceramic and 50-99 are Sintered.\u003cbr\u003eSA : This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.\u003cbr\u003eSP : This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.\u003cbr\u003eCarbon Ceramic (CC) : An organic compound for Scooters with an excellent quality\/price ratio, long lasting and excellent performance in all conditions of use. It ensures high mileage and stability, especially on city streets where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eSX : This sintered compound designed for Off-Road and SuperMotard is designed to ensure maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off road; in other words, cold, hot and extremely difficult conditions (water, sand, mud) that require braking even at low disc temperatures. For this reason the material’s resistance to external atmospheric agents is particularly high. This pad is very aggressive and resistant to high temperatures and is therefore recommended for Motocross and SuperMotard.\u003cbr\u003eSD : Sintered Off-Road compound with good efficiency and significant stability in all conditions of use. Good wear resistance even in water and mud. More aggressive than the SX, it is particularly recommended for enduro use.\u003cbr\u003eTT : The Semi-metallic Carbon Ceramic that makes up this pad is also suited for Off Road use. It is a highly modulable material, formulated to work both in dry and wet conditions. It is particularly effective in poor grip situations where high modularity is required.\u003cbr\u003eXS : This is a specific sintered compound for Scooter applications, both front and rear, extremely stable and capable of ensuring consistent performance in all riding conditions. It is the ideal material for latest generation maxi scooters and it is characterised by extremely easy running-in. In fact, these brake pads were developed specifically for this type of vehicle, characterised by city use, where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eLA: Sintered front brake pad good in performance and stability together with exceptional durability. This compouns has been studied for road but it can be used also for not intensive sport use","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442449252415,"sku":"brem_07BB0373","price":45.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB0373_b.jpg?v=1782088347"},{"product_id":"brembo-brake-pads-07bb0606-organic-07bb0606-brem-07bb0606","title":"BREMBO Brake Pads 07BB0606 Organic | 07BB0606","description":"Article Number: 07BB0606\u003cbr\u003e\u003cbr\u003eBrembo TT brake pads are designed for all-terrain type machines primarily for on-road use, such as medium-engined trail and enduro machines. The are characterized by constant effectiveness, whatever the conditions.Front\/rear off-road padsMaterial: Semi-metal carbon-ceramicModular friction material: adaptable to conditions (rain, heat, etc.)Mileage performance","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442449416255,"sku":"brem_07BB0606","price":36.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB0606_b.jpg?v=1782088349"},{"product_id":"brembo-front-brake-pads-set-fantic-motor-strada-50-1983-07bb07tt-brem-07bb07tt","title":"Brembo FRONT BRAKE PADS SET FANTIC MOTOR STRADA 50 1983 + | 07BB07TT","description":"Article Number : 07BB07TT\u003cbr\u003e\u003cbr\u003eBREMBO FRONT BRAKE PADS SET\u003cbr\u003eQuantity : 1 blister (For 1 Caliper )\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003ePlease remind to choose the compound in the dropdown menu when you add the product to your cart.\u003cbr\u003eCompounds: \u003cbr\u003eRC : A compound conceived solely for track use, a true racing pad suited for any type of competition.\u003cbr\u003eThe most significant characteristics of this compound are its high friction and consistent efficiency, especially at high disc temperatures. These characteristics ensure superlative, consistent braking for the entire duration of the race and make the braking system much less prone to fade. At low temperatures the efficiency of this compound is limited and consequently it is suited for road use.\u003cbr\u003eSC : Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last lap. The good friction coefficient of this material when cold allows efficient street use.\u003cbr\u003eGenuine (G.): Selected by motorcycle manufacturers, this is the Carbon Ceramic material developed by Brembo as OEM equipment. The cases where the catalogue code corresponds exactly to the material used on the specific application are highlighted in the catalogues you will find at your local dealer.\u003cbr\u003eGenuine brake pads are available in various compounds, each of which is characterised by a different friction coefficient. The friction coefficient is expressed with a number that has a value from 1 to 99: the higher the value of this number the higher the friction coefficient of that particular compound will be. 0-49 compounds are Carbon Ceramic and 50-99 are Sintered.\u003cbr\u003eSA : This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.\u003cbr\u003eSP : This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.\u003cbr\u003eCarbon Ceramic (CC) : An organic compound for Scooters with an excellent quality\/price ratio, long lasting and excellent performance in all conditions of use. It ensures high mileage and stability, especially on city streets where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eSX : This sintered compound designed for Off-Road and SuperMotard is designed to ensure maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off road; in other words, cold, hot and extremely difficult conditions (water, sand, mud) that require braking even at low disc temperatures. For this reason the material’s resistance to external atmospheric agents is particularly high. This pad is very aggressive and resistant to high temperatures and is therefore recommended for Motocross and SuperMotard.\u003cbr\u003eSD : Sintered Off-Road compound with good efficiency and significant stability in all conditions of use. Good wear resistance even in water and mud. More aggressive than the SX, it is particularly recommended for enduro use.\u003cbr\u003eTT : The Semi-metallic Carbon Ceramic that makes up this pad is also suited for Off Road use. It is a highly modulable material, formulated to work both in dry and wet conditions. It is particularly effective in poor grip situations where high modularity is required.\u003cbr\u003eXS : This is a specific sintered compound for Scooter applications, both front and rear, extremely stable and capable of ensuring consistent performance in all riding conditions.\u003cbr\u003eIt is the ideal material for latest generation maxi scooters and it is characterised by extremely easy running-in. In fact, these brake pads were developed specifically for this type of vehicle, characterised by city use, where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eLA: Sintered front brake pad good in performance and stability together with exceptional durability. This compouns has been studied for road but it can be used also for not intensive sport use","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442449514559,"sku":"brem_07BB07TT","price":37.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB07TT_b_66d3eec6-15f9-456a-b695-6268a13df703.jpg?v=1782088355"},{"product_id":"brembo-brake-pads-07bb0907-organic-07bb0907-brem-07bb0907","title":"BREMBO Brake Pads 07BB0907 Organic | 07BB0907","description":"Article Number: 07BB0907\u003cbr\u003e\u003cbr\u003eBrembo carbon-ceramic organic Brake pads feature a high cold and hot friction factor for extensive mileage by virtue of moderate wear.Front\/rear road padsMaterial: carbon-ceramicEnhancement in terms of organic padsMade with a larger amount of carbon than the previous modelsAll-round ability and effectiveness, whatever the conditionsCompatible with cast iron and steel discs","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442449547327,"sku":"brem_07BB0907","price":36.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB0907_b.jpg?v=1782088356"},{"product_id":"brembo-brake-pads-07bb10rc-racing-compound-07bb10rc-brem-07bb10rc","title":"BREMBO Brake Pads 07BB10RC Racing Compound | 07BB10RC","description":"Article Number: 07BB10RC\u003cbr\u003e\u003cbr\u003eThese pads have been designed to guarantee their users exceptional performance. Materials of this type are notable mainly for their high friction coefficient and constant efficiency, especially when exposed to high disc temperatures. These characteristics guarantee an excellent and uniform braking action for the full duration of the race, with less likelihood that fading will occur. Pads of this type provide scant efficiency at lower temperature – a factor of limited importance in racing situations.RC: track-only compound. This is true racing pad, suitable for any kind of competition on the racetrack. With an excellent friction coefficient and – more especially – exceptional stability at high temperatures, the compound gives constant braking lap after lap, from grid to flag.","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442449842239,"sku":"brem_07BB10RC","price":69.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB10RC_b.jpg?v=1782088358"},{"product_id":"brembo-brake-pads-07bb10sc-sintered-metal-07bb10sc-brem-07bb10sc","title":"BREMBO Brake Pads 07BB10SC Sintered Metal | 07BB10SC","description":"Article Number: 07BB10SC\u003cbr\u003e\u003cbr\u003eThese pads have been designed to guarantee their users exceptional performance. Materials of this type are notable mainly for their high friction coefficient and constant efficiency, especially when exposed to high disc temperatures. These characteristics guarantee an excellent and uniform braking action for the full duration of the race, with less likelihood that fading will occur. Pads of this type provide scant efficiency at lower temperature – a factor of limited importance in racing situations.SC: sintered compound for track\/road use, with high friction coefficient when hot. This is a material that stays very stable in all running conditions, and having a good friction coefficient when cold, the material is also compatible with road use.","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442449875007,"sku":"brem_07BB10SC","price":61.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB10SC_b.jpg?v=1782088361"},{"product_id":"brembo-front-brake-pads-set-aprilia-tuareg-50-1985-1985-07bb13sd-brem-07bb13sd","title":"Brembo FRONT BRAKE PADS SET APRILIA TUAREG 50 1985-1985 | 07BB13SD","description":"Article Number : 07BB13SD\u003cbr\u003e\u003cbr\u003eBREMBO FRONT BRAKE PADS SET\u003cbr\u003eQuantity : 1 blister (For 1 Caliper )\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003ePlease remind to choose the compound in the dropdown menu when you add the product to your cart.\u003cbr\u003eCompounds: \u003cbr\u003eRC : A compound conceived solely for track use, a true racing pad suited for any type of competition.\u003cbr\u003eThe most significant characteristics of this compound are its high friction and consistent efficiency, especially at high disc temperatures. These characteristics ensure superlative, consistent braking for the entire duration of the race and make the braking system much less prone to fade. At low temperatures the efficiency of this compound is limited and consequently it is suited for road use.\u003cbr\u003eSC : Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last lap. The good friction coefficient of this material when cold allows efficient street use.\u003cbr\u003eGenuine (G.): Selected by motorcycle manufacturers, this is the Carbon Ceramic material developed by Brembo as OEM equipment. The cases where the catalogue code corresponds exactly to the material used on the specific application are highlighted in the catalogues you will find at your local dealer.\u003cbr\u003eGenuine brake pads are available in various compounds, each of which is characterised by a different friction coefficient. The friction coefficient is expressed with a number that has a value from 1 to 99: the higher the value of this number the higher the friction coefficient of that particular compound will be. 0-49 compounds are Carbon Ceramic and 50-99 are Sintered.\u003cbr\u003eSA : This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.\u003cbr\u003eSP : This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.\u003cbr\u003eCarbon Ceramic (CC) : An organic compound for Scooters with an excellent quality\/price ratio, long lasting and excellent performance in all conditions of use. It ensures high mileage and stability, especially on city streets where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eSX : This sintered compound designed for Off-Road and SuperMotard is designed to ensure maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off road; in other words, cold, hot and extremely difficult conditions (water, sand, mud) that require braking even at low disc temperatures. For this reason the material’s resistance to external atmospheric agents is particularly high. This pad is very aggressive and resistant to high temperatures and is therefore recommended for Motocross and SuperMotard.\u003cbr\u003eSD : Sintered Off-Road compound with good efficiency and significant stability in all conditions of use. Good wear resistance even in water and mud. More aggressive than the SX, it is particularly recommended for enduro use.\u003cbr\u003eTT : The Semi-metallic Carbon Ceramic that makes up this pad is also suited for Off Road use. It is a highly modulable material, formulated to work both in dry and wet conditions. It is particularly effective in poor grip situations where high modularity is required.\u003cbr\u003eXS : This is a specific sintered compound for Scooter applications, both front and rear, extremely stable and capable of ensuring consistent performance in all riding conditions.\u003cbr\u003eIt is the ideal material for latest generation maxi scooters and it is characterised by extremely easy running-in. In fact, these brake pads were developed specifically for this type of vehicle, characterised by city use, where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eLA: Sintered front brake pad good in performance and stability together with exceptional durability. This compouns has been studied for road but it can be used also for not intensive sport use","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442450104383,"sku":"brem_07BB13SD","price":36.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB13SD_b.jpg?v=1782088367"},{"product_id":"brembo-brake-pads-07bb1507-organic-07bb1507-brem-07bb1507","title":"BREMBO Brake Pads 07BB1507 Organic | 07BB1507","description":"Article Number: 07BB1507\u003cbr\u003e\u003cbr\u003eBrembo carbon-ceramic organic Brake pads feature a high cold and hot friction factor for extensive mileage by virtue of moderate wear.Front\/rear road padsMaterial: carbon-ceramicEnhancement in terms of organic padsMade with a larger amount of carbon than the previous modelsAll-round ability and effectiveness, whatever the conditionsCompatible with cast iron and steel discs","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442450169919,"sku":"brem_07BB1507","price":35.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB1507_b.jpg?v=1782088372"},{"product_id":"brembo-front-brake-pads-set-ducati-monster-750-900-1996-1999-07bb1535-brem-07bb1535","title":"Brembo FRONT BRAKE PADS SET DUCATI MONSTER 750 \/ 900 1996-1999 | 07BB1535","description":"Article Number : 07BB1535\u003cbr\u003e\u003cbr\u003eBREMBO FRONT BRAKE PADS SET\u003cbr\u003eQuantity : 1 blister (For 1 Caliper )\u003cbr\u003eModel : Genuine 35\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442450202687,"sku":"brem_07BB1535","price":37.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB1535_b.jpg?v=1782088376"},{"product_id":"brembo-brake-pads-07bb15rc-racing-compound-07bb15rc-brem-07bb15rc","title":"BREMBO Brake Pads 07BB15RC Racing Compound | 07BB15RC","description":"Article Number: 07BB15RC\u003cbr\u003e\u003cbr\u003eThese pads have been designed to guarantee their users exceptional performance. Materials of this type are notable mainly for their high friction coefficient and constant efficiency, especially when exposed to high disc temperatures. These characteristics guarantee an excellent and uniform braking action for the full duration of the race, with less likelihood that fading will occur. Pads of this type provide scant efficiency at lower temperature – a factor of limited importance in racing situations.RC: track-only compound. This is true racing pad, suitable for any kind of competition on the racetrack. With an excellent friction coefficient and – more especially – exceptional stability at high temperatures, the compound gives constant braking lap after lap, from grid to flag.","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442450235455,"sku":"brem_07BB15RC","price":65.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB15RC_b.jpg?v=1782088378"},{"product_id":"brembo-front-brake-pads-set-tm-smr-125-2005-2017-07bb15sr-brem-07bb15sr","title":"Brembo FRONT BRAKE PADS SET TM SMR 125 2005-2017 | 07BB15SR","description":"Article Number : 07BB15SR\u003cbr\u003e\u003cbr\u003eBREMBO FRONT BRAKE PADS SET\u003cbr\u003eQuantity : 1 blister (For 1 Caliper )\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003ePlease remind to choose the compound in the dropdown menu when you add the product to your cart.\u003cbr\u003eCompounds: \u003cbr\u003eRC : A compound conceived solely for track use, a true racing pad suited for any type of competition.\u003cbr\u003eThe most significant characteristics of this compound are its high friction and consistent efficiency, especially at high disc temperatures. These characteristics ensure superlative, consistent braking for the entire duration of the race and make the braking system much less prone to fade. At low temperatures the efficiency of this compound is limited and consequently it is suited for road use.\u003cbr\u003eSR : Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last lap. The good friction coefficient of this material when cold allows efficient street use.\u003cbr\u003eGenuine (G.): Selected by motorcycle manufacturers, this is the Carbon Ceramic material developed by Brembo as OEM equipment. The cases where the catalogue code corresponds exactly to the material used on the specific application are highlighted in the catalogues you will find at your local dealer.\u003cbr\u003eGenuine brake pads are available in various compounds, each of which is characterised by a different friction coefficient. The friction coefficient is expressed with a number that has a value from 1 to 99: the higher the value of this number the higher the friction coefficient of that particular compound will be. 0-49 compounds are Carbon Ceramic and 50-99 are Sintered.\u003cbr\u003eSA : This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.\u003cbr\u003eSP : This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.\u003cbr\u003eCarbon Ceramic (CC) : An organic compound for Scooters with an excellent quality\/price ratio, long lasting and excellent performance in all conditions of use. It ensures high mileage and stability, especially on city streets where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eSX : This sintered compound designed for Off-Road and SuperMotard is designed to ensure maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off road; in other words, cold, hot and extremely difficult conditions (water, sand, mud) that require braking even at low disc temperatures. For this reason the material’s resistance to external atmospheric agents is particularly high. This pad is very aggressive and resistant to high temperatures and is therefore recommended for Motocross and SuperMotard.\u003cbr\u003eSD : Sintered Off-Road compound with good efficiency and significant stability in all conditions of use. Good wear resistance even in water and mud. More aggressive than the SX, it is particularly recommended for enduro use.\u003cbr\u003eTT : The Semi-metallic Carbon Ceramic that makes up this pad is also suited for Off Road use. It is a highly modulable material, formulated to work both in dry and wet conditions. It is particularly effective in poor grip situations where high modularity is required.\u003cbr\u003eXS : This is a specific sintered compound for Scooter applications, both front and rear, extremely stable and capable of ensuring consistent performance in all riding conditions.\u003cbr\u003eIt is the ideal material for latest generation maxi scooters and it is characterised by extremely easy running-in. In fact, these brake pads were developed specifically for this type of vehicle, characterised by city use, where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eLA: Sintered front brake pad good in performance and stability together with exceptional durability. This compouns has been studied for road but it can be used also for not intensive sport use","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442451513407,"sku":"brem_07BB15SR","price":46.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB15SR_b.jpg?v=1782088384"},{"product_id":"brembo-brake-pads-07bb1606-organic-07bb1606-brem-07bb1606","title":"BREMBO Brake Pads 07BB1606 Organic | 07BB1606","description":"Article Number: 07BB1606\u003cbr\u003e\u003cbr\u003eBrembo TT brake pads are designed for all-terrain type machines primarily for on-road use, such as medium-engined trail and enduro machines. The are characterized by constant effectiveness, whatever the conditions.Front\/rear off-road padsMaterial: Semi-metal carbon-ceramicModular friction material: adaptable to conditions (rain, heat, etc.)Mileage performance","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442451546175,"sku":"brem_07BB1606","price":36.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB1606_b.jpg?v=1782088386"},{"product_id":"brembo-front-brake-pads-set-bmw-f-800-r-s-gt-st-2006-2014-07bb1935-brem-07bb1935","title":"Brembo FRONT BRAKE PADS SET BMW F 800 R \/ S \/ GT \/ ST 2006-2014 | 07BB1935","description":"Article Number : 07BB1935\u003cbr\u003e\u003cbr\u003eBREMBO FRONT BRAKE PADS SET\u003cbr\u003eQuantity : 1 blister (For 1 Caliper )\u003cbr\u003eModel : Genuine 35\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442452037695,"sku":"brem_07BB1935","price":39.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB1935_b.jpg?v=1782088391"},{"product_id":"brembo-brake-pads-07bb1973-organic-07bb1973-brem-07bb1973","title":"BREMBO Brake Pads 07BB1973 Organic | 07BB1973","description":"Article Number: 07BB1973\u003cbr\u003e\u003cbr\u003eBrembo original brake pads are the OEM replacement. They feature a high cold and hot friction factor and are a benchmark in terms of longevity by virtue of moderate wear.Front\/rear brake padsMaterial: carbon-ceramic organicEffective in all conditions of useMileage performance","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442452070463,"sku":"brem_07BB1973","price":54.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB1973_b.jpg?v=1782088393"},{"product_id":"brembo-brake-pads-07bb19la-sintered-metal-07bb19la-brem-07bb19la","title":"BREMBO Brake Pads 07BB19LA Sintered Metal | 07BB19LA","description":"Article Number: 07BB19LA\u003cbr\u003e\u003cbr\u003eThese are characterized by a high friction coefficient that stays constant whatever the operating conditions – in heat and cold alike – as well as resisting wear, for superior durability and better mileage.LA: sintered compound intended specifically for front brakes, particularly good in performance under all operating conditions together with exceptional durability.","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442452103231,"sku":"brem_07BB19LA","price":42.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB19LA_b.jpg?v=1782088396"},{"product_id":"brembo-front-brake-pads-set-ducati-multistrada-touring-abs-1200-2010-2014-07bb19sr-brem-07bb19sr","title":"Brembo FRONT BRAKE PADS SET DUCATI MULTISTRADA TOURING ABS 1200 2010-2014 | 07BB19SR","description":"Article Number : 07BB19SR\u003cbr\u003e\u003cbr\u003eBREMBO FRONT BRAKE PADS SET\u003cbr\u003eQuantity :1 blister, for 1 caliper. (If your motorcycle have 2 calipers, you need to buy 2 set.)\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003ePlease remind to choose the compound in the dropdown menu when you add the product to your cart.\u003cbr\u003eCompounds: \u003cbr\u003eRC : A compound conceived solely for track use, a true racing pad suited for any type of competition.\u003cbr\u003eThe most significant characteristics of this compound are its high friction and consistent efficiency, especially at high disc temperatures. These characteristics ensure superlative, consistent braking for the entire duration of the race and make the braking system much less prone to fade. At low temperatures the efficiency of this compound is limited and consequently it is suited for road use.\u003cbr\u003eSC : Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last lap. The good friction coefficient of this material when cold allows efficient street use.\u003cbr\u003eGenuine (G.): Selected by motorcycle manufacturers, this is the Carbon Ceramic material developed by Brembo as OEM equipment. The cases where the catalogue code corresponds exactly to the material used on the specific application are highlighted in the catalogues you will find at your local dealer.\u003cbr\u003eGenuine brake pads are available in various compounds, each of which is characterised by a different friction coefficient. The friction coefficient is expressed with a number that has a value from 1 to 99: the higher the value of this number the higher the friction coefficient of that particular compound will be. 0-49 compounds are Carbon Ceramic and 50-99 are Sintered.\u003cbr\u003eSA : This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.\u003cbr\u003eSP : This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.\u003cbr\u003eCarbon Ceramic (CC) : An organic compound for Scooters with an excellent quality\/price ratio, long lasting and excellent performance in all conditions of use. It ensures high mileage and stability, especially on city streets where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eSX : This sintered compound designed for Off-Road and SuperMotard is designed to ensure maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off road; in other words, cold, hot and extremely difficult conditions (water, sand, mud) that require braking even at low disc temperatures. For this reason the material’s resistance to external atmospheric agents is particularly high. This pad is very aggressive and resistant to high temperatures and is therefore recommended for Motocross and SuperMotard.\u003cbr\u003eSD : Sintered Off-Road compound with good efficiency and significant stability in all conditions of use. Good wear resistance even in water and mud. More aggressive than the SX, it is particularly recommended for enduro use.\u003cbr\u003eTT : The Semi-metallic Carbon Ceramic that makes up this pad is also suited for Off Road use. It is a highly modulable material, formulated to work both in dry and wet conditions. It is particularly effective in poor grip situations where high modularity is required.\u003cbr\u003eXS : This is a specific sintered compound for Scooter applications, both front and rear, extremely stable and capable of ensuring consistent performance in all riding conditions.\u003cbr\u003eIt is the ideal material for latest generation maxi scooters and it is characterised by extremely easy running-in. In fact, these brake pads were developed specifically for this type of vehicle, characterised by city use, where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eLA: Sintered front brake pad good in performance and stability together with exceptional durability. This compouns has been studied for road but it can be used also for not intensive sport use","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442452135999,"sku":"brem_07BB19SR","price":46.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB19SR_b.jpg?v=1782088398"},{"product_id":"brembo-front-brake-pads-set-bmw-r-80-r-800-1993-07bb2107-brem-07bb2107","title":"Brembo FRONT BRAKE PADS SET BMW R 80 R 800 1993 + | 07BB2107","description":"Article Number : 07BB2107\u003cbr\u003e\u003cbr\u003eBREMBO FRONT BRAKE PADS SET\u003cbr\u003eQuantity : 1 blister (For 1 Caliper )\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003ePlease remind to choose the compound in the dropdown menu when you add the product to your cart.\u003cbr\u003eCompounds: \u003cbr\u003eRC : A compound conceived solely for track use, a true racing pad suited for any type of competition.\u003cbr\u003eThe most significant characteristics of this compound are its high friction and consistent efficiency, especially at high disc temperatures. These characteristics ensure superlative, consistent braking for the entire duration of the race and make the braking system much less prone to fade. At low temperatures the efficiency of this compound is limited and consequently it is suited for road use.\u003cbr\u003eSC : Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last lap. The good friction coefficient of this material when cold allows efficient street use.\u003cbr\u003eGenuine (G.): Selected by motorcycle manufacturers, this is the Carbon Ceramic material developed by Brembo as OEM equipment. The cases where the catalogue code corresponds exactly to the material used on the specific application are highlighted in the catalogues you will find at your local dealer.\u003cbr\u003eGenuine brake pads are available in various compounds, each of which is characterised by a different friction coefficient. The friction coefficient is expressed with a number that has a value from 1 to 99: the higher the value of this number the higher the friction coefficient of that particular compound will be. 0-49 compounds are Carbon Ceramic and 50-99 are Sintered.\u003cbr\u003eSA : This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.\u003cbr\u003eSP : This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.\u003cbr\u003eCarbon Ceramic (CC) : An organic compound for Scooters with an excellent quality\/price ratio, long lasting and excellent performance in all conditions of use. It ensures high mileage and stability, especially on city streets where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eSX : This sintered compound designed for Off-Road and SuperMotard is designed to ensure maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off road; in other words, cold, hot and extremely difficult conditions (water, sand, mud) that require braking even at low disc temperatures. For this reason the material’s resistance to external atmospheric agents is particularly high. This pad is very aggressive and resistant to high temperatures and is therefore recommended for Motocross and SuperMotard.\u003cbr\u003eSD : Sintered Off-Road compound with good efficiency and significant stability in all conditions of use. Good wear resistance even in water and mud. More aggressive than the SX, it is particularly recommended for enduro use.\u003cbr\u003eTT : The Semi-metallic Carbon Ceramic that makes up this pad is also suited for Off Road use. It is a highly modulable material, formulated to work both in dry and wet conditions. It is particularly effective in poor grip situations where high modularity is required.\u003cbr\u003eXS : This is a specific sintered compound for Scooter applications, both front and rear, extremely stable and capable of ensuring consistent performance in all riding conditions.\u003cbr\u003eIt is the ideal material for latest generation maxi scooters and it is characterised by extremely easy running-in. In fact, these brake pads were developed specifically for this type of vehicle, characterised by city use, where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eLA: Sintered front brake pad good in performance and stability together with exceptional durability. This compouns has been studied for road but it can be used also for not intensive sport use","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442452201535,"sku":"brem_07BB2107","price":34.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB2107_b.jpg?v=1782088402"},{"product_id":"brembo-front-brake-pads-set-bmw-k-100-rs-16v-1000-1990-07bb2207-brem-07bb2207","title":"Brembo FRONT BRAKE PADS SET BMW K 100 RS 16V 1000 1990 + | 07BB2207","description":"Article Number : 07BB2207\u003cbr\u003e\u003cbr\u003eBREMBO FRONT BRAKE PADS SET\u003cbr\u003eQuantity :1 blister, for 1 caliper. (If your motorcycle have 2 calipers, you need to buy 2 set.)\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003ePlease remind to choose the compound in the dropdown menu when you add the product to your cart.\u003cbr\u003eCompounds: \u003cbr\u003eRC : A compound conceived solely for track use, a true racing pad suited for any type of competition.\u003cbr\u003eThe most significant characteristics of this compound are its high friction and consistent efficiency, especially at high disc temperatures. These characteristics ensure superlative, consistent braking for the entire duration of the race and make the braking system much less prone to fade. At low temperatures the efficiency of this compound is limited and consequently it is suited for road use.\u003cbr\u003eSC : Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last lap. The good friction coefficient of this material when cold allows efficient street use.\u003cbr\u003eGenuine (G.): Selected by motorcycle manufacturers, this is the Carbon Ceramic material developed by Brembo as OEM equipment. The cases where the catalogue code corresponds exactly to the material used on the specific application are highlighted in the catalogues you will find at your local dealer.\u003cbr\u003eGenuine brake pads are available in various compounds, each of which is characterised by a different friction coefficient. The friction coefficient is expressed with a number that has a value from 1 to 99: the higher the value of this number the higher the friction coefficient of that particular compound will be. 0-49 compounds are Carbon Ceramic and 50-99 are Sintered.\u003cbr\u003eSA : This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.\u003cbr\u003eSP : This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.\u003cbr\u003eCarbon Ceramic (CC) : An organic compound for Scooters with an excellent quality\/price ratio, long lasting and excellent performance in all conditions of use. It ensures high mileage and stability, especially on city streets where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eSX : This sintered compound designed for Off-Road and SuperMotard is designed to ensure maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off road; in other words, cold, hot and extremely difficult conditions (water, sand, mud) that require braking even at low disc temperatures. For this reason the material’s resistance to external atmospheric agents is particularly high. This pad is very aggressive and resistant to high temperatures and is therefore recommended for Motocross and SuperMotard.\u003cbr\u003eSD : Sintered Off-Road compound with good efficiency and significant stability in all conditions of use. Good wear resistance even in water and mud. More aggressive than the SX, it is particularly recommended for enduro use.\u003cbr\u003eTT : The Semi-metallic Carbon Ceramic that makes up this pad is also suited for Off Road use. It is a highly modulable material, formulated to work both in dry and wet conditions. It is particularly effective in poor grip situations where high modularity is required.\u003cbr\u003eXS : This is a specific sintered compound for Scooter applications, both front and rear, extremely stable and capable of ensuring consistent performance in all riding conditions.\u003cbr\u003eIt is the ideal material for latest generation maxi scooters and it is characterised by extremely easy running-in. In fact, these brake pads were developed specifically for this type of vehicle, characterised by city use, where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eLA: Sintered front brake pad good in performance and stability together with exceptional durability. This compouns has been studied for road but it can be used also for not intensive sport use","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442452267071,"sku":"brem_07BB2207","price":36.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB2207_b.jpg?v=1782088407"},{"product_id":"brembo-brake-pads-07bb22la-sintered-metal-07bb22la-brem-07bb22la","title":"BREMBO Brake Pads 07BB22LA Sintered Metal | 07BB22LA","description":"Article Number: 07BB22LA\u003cbr\u003e\u003cbr\u003eThese are characterized by a high friction coefficient that stays constant whatever the operating conditions – in heat and cold alike – as well as resisting wear, for superior durability and better mileage.LA: sintered compound intended specifically for front brakes, particularly good in performance under all operating conditions together with exceptional durability.","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442452299839,"sku":"brem_07BB22LA","price":42.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB22LA_b.jpg?v=1782088409"},{"product_id":"brembo-brake-pads-07bb22sa-sintered-metal-07bb22sa-brem-07bb22sa","title":"BREMBO Brake Pads 07BB22SA Sintered Metal | 07BB22SA","description":"Article Number: 07BB22SA\u003cbr\u003e\u003cbr\u003eThese are characterized by a high friction coefficient that stays constant whatever the operating conditions – in heat and cold alike – as well as resisting wear, for superior durability and better mileage.SA: a sintered compound intended for front brakes, typified by particularly good efficiency under all operating conditions. An ideal alternative to OE pads.","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442452332607,"sku":"brem_07BB22SA","price":40.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB22SA_b.jpg?v=1782088411"},{"product_id":"brembo-brake-pads-07bb2407-organic-07bb2407-brem-07bb2407","title":"BREMBO Brake Pads 07BB2407 Organic | 07BB2407","description":"Article Number: 07BB2407\u003cbr\u003e\u003cbr\u003eBrembo carbon-ceramic organic Brake pads feature a high cold and hot friction factor for extensive mileage by virtue of moderate wear.Front\/rear road padsMaterial: carbon-ceramicEnhancement in terms of organic padsMade with a larger amount of carbon than the previous modelsAll-round ability and effectiveness, whatever the conditionsCompatible with cast iron and steel discs","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442452398143,"sku":"brem_07BB2407","price":37.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB2407_b.jpg?v=1782088415"},{"product_id":"brembo-brake-pads-07bb24la-sintered-metal-07bb24la-brem-07bb24la","title":"BREMBO Brake Pads 07BB24LA Sintered Metal | 07BB24LA","description":"Article Number: 07BB24LA\u003cbr\u003e\u003cbr\u003eThese are characterized by a high friction coefficient that stays constant whatever the operating conditions – in heat and cold alike – as well as resisting wear, for superior durability and better mileage.LA: sintered compound intended specifically for front brakes, particularly good in performance under all operating conditions together with exceptional durability.","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442452430911,"sku":"brem_07BB24LA","price":42.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB24LA_b.jpg?v=1782088417"},{"product_id":"brembo-brake-pads-07bb2507-organic-07bb2507-brem-07bb2507","title":"BREMBO Brake Pads 07BB2507 Organic | 07BB2507","description":"Article Number: 07BB2507\u003cbr\u003e\u003cbr\u003eBrembo carbon-ceramic organic Brake pads feature a high cold and hot friction factor for extensive mileage by virtue of moderate wear.Front\/rear road padsMaterial: carbon-ceramicEnhancement in terms of organic padsMade with a larger amount of carbon than the previous modelsAll-round ability and effectiveness, whatever the conditionsCompatible with cast iron and steel discs","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442452463679,"sku":"brem_07BB2507","price":39.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB2507_b.jpg?v=1782088419"},{"product_id":"brembo-brake-pads-07bb2607-organic-07bb2607-brem-07bb2607","title":"BREMBO Brake Pads 07BB2607 Organic | 07BB2607","description":"Article Number: 07BB2607\u003cbr\u003e\u003cbr\u003eBrembo carbon-ceramic organic Brake pads feature a high cold and hot friction factor for extensive mileage by virtue of moderate wear.Front\/rear road padsMaterial: carbon-ceramicEnhancement in terms of organic padsMade with a larger amount of carbon than the previous modelsAll-round ability and effectiveness, whatever the conditionsCompatible with cast iron and steel discs","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442452496447,"sku":"brem_07BB2607","price":37.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB2607_b_d00b84e6-e72c-4157-ab20-7fd1eb7911df.jpg?v=1782088422"},{"product_id":"brembo-brake-pads-07bb26la-sintered-metal-07bb26la-brem-07bb26la","title":"BREMBO Brake Pads 07BB26LA Sintered Metal | 07BB26LA","description":"Article Number: 07BB26LA\u003cbr\u003e\u003cbr\u003eThese are characterized by a high friction coefficient that stays constant whatever the operating conditions – in heat and cold alike – as well as resisting wear, for superior durability and better mileage.LA: sintered compound intended specifically for front brakes, particularly good in performance under all operating conditions together with exceptional durability.","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442452529215,"sku":"brem_07BB26LA","price":43.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB26LA_b.jpg?v=1782088424"},{"product_id":"brembo-front-brake-pads-set-bmw-k-1300-s-2007-2016-07bb26sr-brem-07bb26sr","title":"Brembo FRONT BRAKE PADS SET BMW K 1300 S 2007-2016 | 07BB26SR","description":"Article Number : 07BB26SR\u003cbr\u003e\u003cbr\u003eBREMBO FRONT BRAKE PADS SET\u003cbr\u003eQuantity :1 blister, for 1 caliper. (If your motorcycle have 2 calipers, you need to buy 2 set.)\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003ePlease remind to choose the compound in the dropdown menu when you add the product to your cart.\u003cbr\u003eCompounds: \u003cbr\u003eRC : A compound conceived solely for track use, a true racing pad suited for any type of competition.\u003cbr\u003eThe most significant characteristics of this compound are its high friction and consistent efficiency, especially at high disc temperatures. These characteristics ensure superlative, consistent braking for the entire duration of the race and make the braking system much less prone to fade. At low temperatures the efficiency of this compound is limited and consequently it is suited for road use.\u003cbr\u003eSR : Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last lap. The good friction coefficient of this material when cold allows efficient street use.\u003cbr\u003eGenuine (G.): Selected by motorcycle manufacturers, this is the Carbon Ceramic material developed by Brembo as OEM equipment. The cases where the catalogue code corresponds exactly to the material used on the specific application are highlighted in the catalogues you will find at your local dealer.\u003cbr\u003eGenuine brake pads are available in various compounds, each of which is characterised by a different friction coefficient. The friction coefficient is expressed with a number that has a value from 1 to 99: the higher the value of this number the higher the friction coefficient of that particular compound will be. 0-49 compounds are Carbon Ceramic and 50-99 are Sintered.\u003cbr\u003eSA : This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.\u003cbr\u003eSP : This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.\u003cbr\u003eCarbon Ceramic (CC) : An organic compound for Scooters with an excellent quality\/price ratio, long lasting and excellent performance in all conditions of use. It ensures high mileage and stability, especially on city streets where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eSX : This sintered compound designed for Off-Road and SuperMotard is designed to ensure maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off road; in other words, cold, hot and extremely difficult conditions (water, sand, mud) that require braking even at low disc temperatures. For this reason the material’s resistance to external atmospheric agents is particularly high. This pad is very aggressive and resistant to high temperatures and is therefore recommended for Motocross and SuperMotard.\u003cbr\u003eSD : Sintered Off-Road compound with good efficiency and significant stability in all conditions of use. Good wear resistance even in water and mud. More aggressive than the SX, it is particularly recommended for enduro use.\u003cbr\u003eTT : The Semi-metallic Carbon Ceramic that makes up this pad is also suited for Off Road use. It is a highly modulable material, formulated to work both in dry and wet conditions. It is particularly effective in poor grip situations where high modularity is required.\u003cbr\u003eXS : This is a specific sintered compound for Scooter applications, both front and rear, extremely stable and capable of ensuring consistent performance in all riding conditions.\u003cbr\u003eIt is the ideal material for latest generation maxi scooters and it is characterised by extremely easy running-in. In fact, these brake pads were developed specifically for this type of vehicle, characterised by city use, where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eLA: Sintered front brake pad good in performance and stability together with exceptional durability. This compouns has been studied for road but it can be used also for not intensive sport use","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442452561983,"sku":"brem_07BB26SR","price":48.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB26SR_b.jpg?v=1782088427"},{"product_id":"brembo-rear-brake-pads-set-bmw-r-850-c-850-1999-07bb2809-brem-07bb2809","title":"Brembo REAR BRAKE PADS SET BMW R 850 C 850 1999 + | 07BB2809","description":"Article Number : 07BB2809\u003cbr\u003e\u003cbr\u003eBREMBO REAR BRAKE PADS SET\u003cbr\u003eQuantity : 1 blister (For 1 Caliper )\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003ePlease remind to choose the compound in the dropdown menu when you add the product to your cart.\u003cbr\u003eCompounds: \u003cbr\u003eRC : A compound conceived solely for track use, a true racing pad suited for any type of competition.\u003cbr\u003eThe most significant characteristics of this compound are its high friction and consistent efficiency, especially at high disc temperatures. These characteristics ensure superlative, consistent braking for the entire duration of the race and make the braking system much less prone to fade. At low temperatures the efficiency of this compound is limited and consequently it is suited for road use.\u003cbr\u003eSC : Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last lap. The good friction coefficient of this material when cold allows efficient street use.\u003cbr\u003eGenuine (G.): Selected by motorcycle manufacturers, this is the Carbon Ceramic material developed by Brembo as OEM equipment. The cases where the catalogue code corresponds exactly to the material used on the specific application are highlighted in the catalogues you will find at your local dealer.\u003cbr\u003eGenuine brake pads are available in various compounds, each of which is characterised by a different friction coefficient. The friction coefficient is expressed with a number that has a value from 1 to 99: the higher the value of this number the higher the friction coefficient of that particular compound will be. 0-49 compounds are Carbon Ceramic and 50-99 are Sintered.\u003cbr\u003eSA : This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.\u003cbr\u003eSP : This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.\u003cbr\u003eCarbon Ceramic (CC) : An organic compound for Scooters with an excellent quality\/price ratio, long lasting and excellent performance in all conditions of use. It ensures high mileage and stability, especially on city streets where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eSX : This sintered compound designed for Off-Road and SuperMotard is designed to ensure maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off road; in other words, cold, hot and extremely difficult conditions (water, sand, mud) that require braking even at low disc temperatures. For this reason the material’s resistance to external atmospheric agents is particularly high. This pad is very aggressive and resistant to high temperatures and is therefore recommended for Motocross and SuperMotard.\u003cbr\u003eSD : Sintered Off-Road compound with good efficiency and significant stability in all conditions of use. Good wear resistance even in water and mud. More aggressive than the SX, it is particularly recommended for enduro use.\u003cbr\u003eTT : The Semi-metallic Carbon Ceramic that makes up this pad is also suited for Off Road use. It is a highly modulable material, formulated to work both in dry and wet conditions. It is particularly effective in poor grip situations where high modularity is required.\u003cbr\u003eXS : This is a specific sintered compound for Scooter applications, both front and rear, extremely stable and capable of ensuring consistent performance in all riding conditions.\u003cbr\u003eIt is the ideal material for latest generation maxi scooters and it is characterised by extremely easy running-in. In fact, these brake pads were developed specifically for this type of vehicle, characterised by city use, where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eLA: Sintered front brake pad good in performance and stability together with exceptional durability. This compouns has been studied for road but it can be used also for not intensive sport use","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442452594751,"sku":"brem_07BB2809","price":36.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB2809_b.jpg?v=1782088430"},{"product_id":"brembo-brake-pads-07bb33la-sintered-metal-07bb33la-brem-07bb33la","title":"BREMBO Brake Pads 07BB33LA Sintered Metal | 07BB33LA","description":"Article Number: 07BB33LA\u003cbr\u003e\u003cbr\u003eThese are characterized by a high friction coefficient that stays constant whatever the operating conditions – in heat and cold alike – as well as resisting wear, for superior durability and better mileage.LA: sintered compound intended specifically for front brakes, particularly good in performance under all operating conditions together with exceptional durability.","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442452693055,"sku":"brem_07BB33LA","price":65.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB33LA_b.jpg?v=1782088432"},{"product_id":"brembo-front-brake-pads-set-can-am-lynx-xtrim-commander-sdi-600-1970-07bb3590-brem-07bb3590","title":"Brembo FRONT BRAKE PADS SET CAN-AM LYNX XTRIM COMMANDER SDI 600 1970 + | 07BB3590","description":"Article Number : 07BB3590\u003cbr\u003e\u003cbr\u003eBREMBO FRONT BRAKE PADS SET\u003cbr\u003eQuantity : 1 blister (For 1 Caliper )\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003ePlease remind to choose the compound in the dropdown menu when you add the product to your cart.\u003cbr\u003eCompounds: \u003cbr\u003eRC : A compound conceived solely for track use, a true racing pad suited for any type of competition.\u003cbr\u003eThe most significant characteristics of this compound are its high friction and consistent efficiency, especially at high disc temperatures. These characteristics ensure superlative, consistent braking for the entire duration of the race and make the braking system much less prone to fade. At low temperatures the efficiency of this compound is limited and consequently it is suited for road use.\u003cbr\u003eSC : Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last lap. The good friction coefficient of this material when cold allows efficient street use.\u003cbr\u003eGenuine (G.): Selected by motorcycle manufacturers, this is the Carbon Ceramic material developed by Brembo as OEM equipment. The cases where the catalogue code corresponds exactly to the material used on the specific application are highlighted in the catalogues you will find at your local dealer.\u003cbr\u003eGenuine brake pads are available in various compounds, each of which is characterised by a different friction coefficient. The friction coefficient is expressed with a number that has a value from 1 to 99: the higher the value of this number the higher the friction coefficient of that particular compound will be. 0-49 compounds are Carbon Ceramic and 50-99 are Sintered.\u003cbr\u003eSA : This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.\u003cbr\u003eSP : This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.\u003cbr\u003eCarbon Ceramic (CC) : An organic compound for Scooters with an excellent quality\/price ratio, long lasting and excellent performance in all conditions of use. It ensures high mileage and stability, especially on city streets where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eSX : This sintered compound designed for Off-Road and SuperMotard is designed to ensure maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off road; in other words, cold, hot and extremely difficult conditions (water, sand, mud) that require braking even at low disc temperatures. For this reason the material’s resistance to external atmospheric agents is particularly high. This pad is very aggressive and resistant to high temperatures and is therefore recommended for Motocross and SuperMotard.\u003cbr\u003eSD : Sintered Off-Road compound with good efficiency and significant stability in all conditions of use. Good wear resistance even in water and mud. More aggressive than the SX, it is particularly recommended for enduro use.\u003cbr\u003eTT : The Semi-metallic Carbon Ceramic that makes up this pad is also suited for Off Road use. It is a highly modulable material, formulated to work both in dry and wet conditions. It is particularly effective in poor grip situations where high modularity is required.\u003cbr\u003eXS : This is a specific sintered compound for Scooter applications, both front and rear, extremely stable and capable of ensuring consistent performance in all riding conditions.\u003cbr\u003eIt is the ideal material for latest generation maxi scooters and it is characterised by extremely easy running-in. In fact, these brake pads were developed specifically for this type of vehicle, characterised by city use, where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eLA: Sintered front brake pad good in performance and stability together with exceptional durability. This compouns has been studied for road but it can be used also for not intensive sport use","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442452725823,"sku":"brem_07BB3590","price":89.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB3590_b.jpg?v=1782088434"},{"product_id":"brembo-rear-brake-pad-set-ducati-hypermotard-796-2010-2019-07bb3635-brem-07bb3635","title":"Brembo REAR BRAKE PAD SET DUCATI HYPERMOTARD 796 2010-2019 | 07BB3635","description":"Article Number : 07BB3635\u003cbr\u003e\u003cbr\u003eBREMBO REAR BRAKE PADS SET\u003cbr\u003eCode: 07BB3635\u003cbr\u003eQuantity: 1 blister (For 1 caliper)\u003cbr\u003eCompound: Genuine 35\u003cbr\u003eCompatible with: Ducati Hypermotard 796 2010-2019\u003cbr\u003eChosen by the motorcycle manufacturers, the genuine pads are available in different compounds, each of which is characterized by a different coefficient of friction.\u003cbr\u003eThe friction coefficient is expressed by a number with a value ranging from 1 to 99: the higher the value of this number, the greater the friction coefficient of that particular compound.\u003cbr\u003eThe Carbon Ceramica compound is the evolution of the organic compound, with the use of greater amounts of carbon.\u003cbr\u003eThis results in a high mileage in addition to the excellent performance both hot and cold, dry and wet, which characterize this friction material.\u003cbr\u003eNB: The photo is purely indicative to demonstrate the quality of the product.\u003cbr\u003eFOR MORE INFORMATION DO NOT HESITATE TO CONTACT US.","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442452758591,"sku":"brem_07BB3635","price":39.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB3635_b.jpg?v=1782088436"},{"product_id":"brembo-front-brake-pads-set-ducati-xdiavel-s-1262-2016-07bb3796-brem-07bb3796","title":"Brembo FRONT BRAKE PADS SET DUCATI XDIAVEL S 1262 2016 + | 07BB3796","description":"Article Number : 07BB3796\u003cbr\u003e\u003cbr\u003eBREMBO FRONT BRAKE PADS SET\u003cbr\u003eQuantity :1 blister, for 1 caliper. (If your motorcycle have 2 calipers, you need to buy 2 set.)\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003ePlease remind to choose the compound in the dropdown menu when you add the product to your cart.\u003cbr\u003eCompounds: \u003cbr\u003eRC : A compound conceived solely for track use, a true racing pad suited for any type of competition.\u003cbr\u003eThe most significant characteristics of this compound are its high friction and consistent efficiency, especially at high disc temperatures. These characteristics ensure superlative, consistent braking for the entire duration of the race and make the braking system much less prone to fade. At low temperatures the efficiency of this compound is limited and consequently it is suited for road use.\u003cbr\u003eSC : Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last lap. The good friction coefficient of this material when cold allows efficient street use.\u003cbr\u003eGenuine (G.): Selected by motorcycle manufacturers, this is the Carbon Ceramic material developed by Brembo as OEM equipment. The cases where the catalogue code corresponds exactly to the material used on the specific application are highlighted in the catalogues you will find at your local dealer.\u003cbr\u003eGenuine brake pads are available in various compounds, each of which is characterised by a different friction coefficient. The friction coefficient is expressed with a number that has a value from 1 to 99: the higher the value of this number the higher the friction coefficient of that particular compound will be. 0-49 compounds are Carbon Ceramic and 50-99 are Sintered.\u003cbr\u003eSA : This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.\u003cbr\u003eSP : This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.\u003cbr\u003eCarbon Ceramic (CC) : An organic compound for Scooters with an excellent quality\/price ratio, long lasting and excellent performance in all conditions of use. It ensures high mileage and stability, especially on city streets where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eSX : This sintered compound designed for Off-Road and SuperMotard is designed to ensure maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off road; in other words, cold, hot and extremely difficult conditions (water, sand, mud) that require braking even at low disc temperatures. For this reason the material’s resistance to external atmospheric agents is particularly high. This pad is very aggressive and resistant to high temperatures and is therefore recommended for Motocross and SuperMotard.\u003cbr\u003eSD : Sintered Off-Road compound with good efficiency and significant stability in all conditions of use. Good wear resistance even in water and mud. More aggressive than the SX, it is particularly recommended for enduro use.\u003cbr\u003eTT : The Semi-metallic Carbon Ceramic that makes up this pad is also suited for Off Road use. It is a highly modulable material, formulated to work both in dry and wet conditions. It is particularly effective in poor grip situations where high modularity is required.\u003cbr\u003eXS : This is a specific sintered compound for Scooter applications, both front and rear, extremely stable and capable of ensuring consistent performance in all riding conditions.\u003cbr\u003eIt is the ideal material for latest generation maxi scooters and it is characterised by extremely easy running-in. In fact, these brake pads were developed specifically for this type of vehicle, characterised by city use, where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eLA: Sintered front brake pad good in performance and stability together with exceptional durability. This compouns has been studied for road but it can be used also for not intensive sport use","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442452791359,"sku":"brem_07BB3796","price":74.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB3796_b.jpg?v=1782088439"},{"product_id":"brembo-brake-pads-07bb3884-organic-07bb3884-brem-07bb3884","title":"BREMBO Brake Pads 07BB3884 Organic | 07BB3884","description":"Article Number: 07BB3884\u003cbr\u003e\u003cbr\u003eBrembo original brake pads are the OEM replacement. They feature a high cold and hot friction factor and are a benchmark in terms of longevity by virtue of moderate wear.Front\/rear brake padsMaterial: carbon-ceramic organicEffective in all conditions of useMileage performance","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442453020735,"sku":"brem_07BB3884","price":63.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB3884_b.jpg?v=1782088443"},{"product_id":"brembo-front-brake-pads-set-mv-agusta-stradale-800-2015-07bb3895-brem-07bb3895","title":"Brembo FRONT BRAKE PADS SET MV AGUSTA STRADALE 800 2015 | 07BB3895","description":"Article Number : 07BB3895\u003cbr\u003e\u003cbr\u003eBREMBO FRONT BRAKE PADS SET\u003cbr\u003eQuantity :1 blister , for 1 caliper. (If your motorcycle have 2 calipers, you need to buy 2 set.)\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003ePlease remind to choose the compound in the dropdown menu when you add the product to your cart.\u003cbr\u003eCompounds: \u003cbr\u003eRC : A compound conceived solely for track use, a true racing pad suited for any type of competition.\u003cbr\u003eThe most significant characteristics of this compound are its high friction and consistent efficiency, especially at high disc temperatures. These characteristics ensure superlative, consistent braking for the entire duration of the race and make the braking system much less prone to fade. At low temperatures the efficiency of this compound is limited and consequently it is suited for road use.\u003cbr\u003eSR : Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last lap. The good friction coefficient of this material when cold allows efficient street use.\u003cbr\u003eGenuine (G.): Selected by motorcycle manufacturers, this is the Carbon Ceramic material developed by Brembo as OEM equipment. The cases where the catalogue code corresponds exactly to the material used on the specific application are highlighted in the catalogues you will find at your local dealer.\u003cbr\u003eGenuine brake pads are available in various compounds, each of which is characterised by a different friction coefficient. The friction coefficient is expressed with a number that has a value from 1 to 99: the higher the value of this number the higher the friction coefficient of that particular compound will be. 0-49 compounds are Carbon Ceramic and 50-99 are Sintered.\u003cbr\u003eSA : This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.\u003cbr\u003eSP : This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.\u003cbr\u003eCarbon Ceramic (CC) : An organic compound for Scooters with an excellent quality\/price ratio, long lasting and excellent performance in all conditions of use. It ensures high mileage and stability, especially on city streets where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eSX : This sintered compound designed for Off-Road and SuperMotard is designed to ensure maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off road; in other words, cold, hot and extremely difficult conditions (water, sand, mud) that require braking even at low disc temperatures. For this reason the material’s resistance to external atmospheric agents is particularly high. This pad is very aggressive and resistant to high temperatures and is therefore recommended for Motocross and SuperMotard.\u003cbr\u003eSD : Sintered Off-Road compound with good efficiency and significant stability in all conditions of use. Good wear resistance even in water and mud. More aggressive than the SX, it is particularly recommended for enduro use.\u003cbr\u003eTT : The Semi-metallic Carbon Ceramic that makes up this pad is also suited for Off Road use. It is a highly modulable material, formulated to work both in dry and wet conditions. It is particularly effective in poor grip situations where high modularity is required.\u003cbr\u003eXS : This is a specific sintered compound for Scooter applications, both front and rear, extremely stable and capable of ensuring consistent performance in all riding conditions.\u003cbr\u003eIt is the ideal material for latest generation maxi scooters and it is characterised by extremely easy running-in. In fact, these brake pads were developed specifically for this type of vehicle, characterised by city use, where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eLA: Sintered front brake pad good in performance and stability together with exceptional durability. This compouns has been studied for road but it can be used also for not intensive sport use","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442454036543,"sku":"brem_07BB3895","price":69.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB3895_b.jpg?v=1782088446"},{"product_id":"brembo-front-brake-pads-set-mv-agusta-stradale-800-2015-07bb3897-brem-07bb3897","title":"Brembo FRONT BRAKE PADS SET MV AGUSTA STRADALE 800 2015 | 07BB3897","description":"Article Number : 07BB3897\u003cbr\u003e\u003cbr\u003eBREMBO FRONT BRAKE PADS SET\u003cbr\u003eQuantity :1 blister , for 1 caliper. (If your motorcycle have 2 calipers, you need to buy 2 set.)\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.\u003cbr\u003ePlease remind to choose the compound in the dropdown menu when you add the product to your cart.\u003cbr\u003eCompounds: \u003cbr\u003eRC : A compound conceived solely for track use, a true racing pad suited for any type of competition.\u003cbr\u003eThe most significant characteristics of this compound are its high friction and consistent efficiency, especially at high disc temperatures. These characteristics ensure superlative, consistent braking for the entire duration of the race and make the braking system much less prone to fade. At low temperatures the efficiency of this compound is limited and consequently it is suited for road use.\u003cbr\u003eSR : Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last Sintered compound for sport street and moderate track use. The good friction coefficient when hot and above all the stability at high temperatures allow consistent braking performance from the start to the last lap. The good friction coefficient of this material when cold allows efficient street use.\u003cbr\u003eGenuine (G.): Selected by motorcycle manufacturers, this is the Carbon Ceramic material developed by Brembo as OEM equipment. The cases where the catalogue code corresponds exactly to the material used on the specific application are highlighted in the catalogues you will find at your local dealer.\u003cbr\u003eGenuine brake pads are available in various compounds, each of which is characterised by a different friction coefficient. The friction coefficient is expressed with a number that has a value from 1 to 99: the higher the value of this number the higher the friction coefficient of that particular compound will be. 0-49 compounds are Carbon Ceramic and 50-99 are Sintered.\u003cbr\u003eSA : This is a sintered compound, specific for front application, characterised by excellent efficiency in all conditions of use. It therefore represents an ideal alternative to original brake pads, both when cold and when hot. This compound is characterised by low wear which guarantees long life and suitable mileage.\u003cbr\u003eSP : This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.\u003cbr\u003eCarbon Ceramic (CC) : An organic compound for Scooters with an excellent quality\/price ratio, long lasting and excellent performance in all conditions of use. It ensures high mileage and stability, especially on city streets where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eSX : This sintered compound designed for Off-Road and SuperMotard is designed to ensure maximum efficiency and consistent performance in the varied conditions of use that a bike has to handle off road; in other words, cold, hot and extremely difficult conditions (water, sand, mud) that require braking even at low disc temperatures. For this reason the material’s resistance to external atmospheric agents is particularly high. This pad is very aggressive and resistant to high temperatures and is therefore recommended for Motocross and SuperMotard.\u003cbr\u003eSD : Sintered Off-Road compound with good efficiency and significant stability in all conditions of use. Good wear resistance even in water and mud. More aggressive than the SX, it is particularly recommended for enduro use.\u003cbr\u003eTT : The Semi-metallic Carbon Ceramic that makes up this pad is also suited for Off Road use. It is a highly modulable material, formulated to work both in dry and wet conditions. It is particularly effective in poor grip situations where high modularity is required.\u003cbr\u003eXS : This is a specific sintered compound for Scooter applications, both front and rear, extremely stable and capable of ensuring consistent performance in all riding conditions.\u003cbr\u003eIt is the ideal material for latest generation maxi scooters and it is characterised by extremely easy running-in. In fact, these brake pads were developed specifically for this type of vehicle, characterised by city use, where typical Scooter braking is different than that of a motorcycle.\u003cbr\u003eLA: Sintered front brake pad good in performance and stability together with exceptional durability. This compouns has been studied for road but it can be used also for not intensive sport use","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442454069311,"sku":"brem_07BB3897","price":69.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07BB3897_b.jpg?v=1782088449"},{"product_id":"brembo-left-endurance-front-brake-pad-for-gp4-lm-calipers-07e32180-brem-07e32180","title":"Brembo LEFT ENDURANCE FRONT BRAKE PAD FOR GP4-LM CALIPERS | 07E32180","description":"Article Number : 07E32180\u003cbr\u003e\u003cbr\u003eBREMBO ENDURANCE FRONT BRAKE PAD\u003cbr\u003eCompatible with: GP4-LM Calipers\u003cbr\u003ePosition: Left side\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442454102079,"sku":"brem_07E32180","price":238.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07E32180_b.jpg?v=1782088451"},{"product_id":"brembo-right-endurance-front-brake-pad-for-gp4-lm-calipers-07e32181-brem-07e32181","title":"Brembo RIGHT ENDURANCE FRONT BRAKE PAD FOR GP4-LM CALIPERS | 07E32181","description":"Article Number : 07E32181\u003cbr\u003e\u003cbr\u003eBREMBO ENDURANCE FRONT BRAKE PAD\u003cbr\u003eCompatible with: GP4-LM Calipers\u003cbr\u003ePosition: Right side\u003cbr\u003eUsing a combination of high quality brake pads and discs is a fundamental prerequisite for the optimum performance of any braking system.\u003cbr\u003eBrembo brake pads represent the best in terms of performance, comfort and durability.\u003cbr\u003eThey are available for over 6000 applications, with a wide variety of compounds: from organic resins to sintered and carbon-ceramic pads.\u003cbr\u003eBrembo can therefore cater for the specific needs of every imaginable type of motorcycle - from race and street bikes to city and off-road machines - and fulfil the expectations of every rider.","brand":"Brembo","offers":[{"title":"Default Title","offer_id":43442454134847,"sku":"brem_07E32181","price":238.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0667\/3213\/0367\/files\/brem_07E32181_b.jpg?v=1782088454"}],"url":"https:\/\/vaultmoto.com\/collections\/brakes-brembo.oembed","provider":"VaultMoto","version":"1.0","type":"link"}